• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Caliper question? One or Both?

  • Thread starter Thread starter Dave_93stang
  • Start date Start date Jun 28, 2005
D

Dave_93stang

New Member
Jan 9, 2000
24
0
0
Westminster,Md
Jun 28, 2005
#1
  • Jun 28, 2005
  • #1
Hello,

Doing my brakes on the rear of a 96 GT one of the pistons on the caliper is completely frozen in place. torch etc I can not get it to budge at all.. My question is, can I just replace that Caliper? the other side is in great working condition... I was just unsure if there where draw backs to replacing one side?
 
D

Dave_93stang

New Member
Jan 9, 2000
24
0
0
Westminster,Md
Jun 28, 2005
#2
  • Jun 28, 2005
  • #2
No Ideas?
 

96WhiteNight

New Member
May 11, 2004
303
0
0
Carlisle, PA
Jun 28, 2005
#3
  • Jun 28, 2005
  • #3
As long as the other one is fine i can't imagine you would have a problem. Just make sure its he same OEM caliper.
 

AmBo

Active Member
Feb 3, 2004
1,027
1
36
New Jersey
Jun 28, 2005
#4
  • Jun 28, 2005
  • #4
96WhiteNight said:
As long as the other one is fine i can't imagine you would have a problem. Just make sure its he same OEM caliper.
Click to expand...

 
D

Dave_93stang

New Member
Jan 9, 2000
24
0
0
Westminster,Md
Jun 28, 2005
#5
  • Jun 28, 2005
  • #5
Thanks guys sorry for being impatient, but I have been stangless for 2 years now and trying to get this one up so I can get it inspected and enjoy it
 

Dusstbuster

I love meat more than anything! I just have a spec
May 31, 2004
1,462
33
64
Moorhead, Minnesota
Jun 28, 2005
#6
  • Jun 28, 2005
  • #6
wow thats the exact problem i just had yesterday. My drivers side rear caliper/pad/rotor/whatever on my 96 GT was smoking after we changed out the pads and rotor because one of them was frozen in place and wouldnt allow the rotor to fit in properly. Im going to probably just go out and buy a new caliper because the passenger side works fine but the drivers side WILL NOT budge. Had to throw on the old pads which were "warped" properly to allow it to drive and brake decently until a new caliper shows up.
 
D

Dave_93stang

New Member
Jan 9, 2000
24
0
0
Westminster,Md
Jun 28, 2005
#7
  • Jun 28, 2005
  • #7
Dusstbuster said:
wow thats the exact problem i just had yesterday. My drivers side rear caliper/pad/rotor/whatever on my 96 GT was smoking after we changed out the pads and rotor because one of them was frozen in place and wouldnt allow the rotor to fit in properly. Im going to probably just go out and buy a new caliper because the passenger side works fine but the drivers side WILL NOT budge. Had to throw on the old pads which were "warped" properly to allow it to drive and brake decently until a new caliper shows up.
Click to expand...

Yeah I tried everything to get that piston to move.. just wouldn't.. Hopefully the part comes in shortly
 

96WhiteNight

New Member
May 11, 2004
303
0
0
Carlisle, PA
Jun 28, 2005
#8
  • Jun 28, 2005
  • #8
Good luck guys
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,371
18,119
224
Massachusetts
Jun 28, 2005
#9
  • Jun 28, 2005
  • #9
It's pretty common with the Varga-style rear calipers.

Happens from not using your e-brake a lot....but sometimes it freezes on it's own.
 
You must log in or register to reply here.

Similar threads

W
Front ATS brakes with Taurus rear brakes. Full parts needed?
  • Wagonized
  • Sep 24, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
291
Fox 5.0 Mustang Tech Sep 25, 2026
General karthief
G
Auto City Classics 67-70 Mustang disc brake kit question/s
  • GOvert
  • Jun 30, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
183
1965 - 1973 Classic Mustangs -General/Talk- Jun 30, 2026
GOvert
G
H
Strange steering/brake issue
  • Haxmaster
  • Jun 2, 2026
  • SN95 4.6L Mustang Tech
Replies
1
Views
183
SN95 4.6L Mustang Tech Jun 3, 2026
squeak93
8
87 lx 4cyl to v8 project 4 lug disc conversion questions
  • 87lx428
  • Mar 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
628
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 25, 2026
87lx428
8
68 vert where to start?
  • 67 blueberry
  • Jul 2, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
0
Views
145
1965 - 1973 Classic Mustangs -General/Talk- Jul 2, 2026
67 blueberry
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?