Alright, got a custom from FTI (used) and I am totally stumped on what I am doing wrong. I got the intake and exhaust OPENING numbers @ .050, but I am not sure how to get the closing numbers to match the cam card. For instance, INTAKE OPENS @ .050 @ 4* BTDC, and is supposed to close @ 42* ABDC. I got the 4* OPEN part, but it is closing (indicator back to 0) at around 80*?? Same goes for the exhaust, I got the OPEN spec, but the CLOSED spec @ .050 is way off again. WTF