Cam Experts Info Required!

a cam expert i am not....... but you dont need one for this.


im going to make some assumptions here.......so follow along

you decked the block .020" because you bought new pistons, and they sat 20 thou under deck...
thus, milling for zero deck height?

if this is the case, you should not have any issues with p/v........but imm make the requisite recommendation of "ALWAYS CHECK".....just because it is PC to do so......


now, if you decked the block for no apparent reason......your going to have pistons that stick out the hole anywhere from .002-.009...... depending on a few different factors. then you need to start thinking of head gasket thickness etc.... you want .030 of piston to deck clearance on a street motor ......generally. you need to know if this is the case!

So are the heads shaved/decked or not? You need to clarify that.

Beyond that confusion, always check it's the only way to know.