Cam Swap Question

[Mileshigh]

Ok so i got a 1998 gt with pi head/pi cams swap and bullitt intake setup. Im thinking about going with a new set of cams but not sure what cams i can get that will work well and not have piston to valve clearance problems. I know that with the npi block and pi top end im running a higher compression but im not sure if that effects anything. Im just looking for suggestions.

 

[squeak93]

Most stage one cams will work w/o ptv clearance issues.

 

[trinity_gt]

I think that combo would love Comp 262AHs and a good tune and shouldn't worry you about PTV.

 

[Mileshigh]

As this is my first dealings with an ohc engine, is there any way to check that clearance without removing the heads? Oh also i have 3.73 gears in the rear with a t-45 trans