F Fordman1995 New Member Oct 5, 2009 28 0 0 Oct 18, 2009 #1 Oct 18, 2009 #1 Will a flat Tappet cam work with EFI?
revhead347 Apparently my ex-husband made that mistake. 20+ Year Stangneter Jun 14, 2004 9,303 1,648 214 Acworth, GA Oct 18, 2009 #2 Oct 18, 2009 #2 Yes. Flat tappet or roller is not going to have anything to do with whether or not you run F/I. Kurt BlownFiveLiter have car, will race....wait, it doesn't run 15 Year Member Nov 29, 1999 3,133 18 108 Chicagoland Oct 18, 2009 #3 Oct 18, 2009 #3 Just make sure it has the 302 HO / 351W firing order. S sgarrelts01 New Member Apr 26, 2009 133 0 0 Niles, Michigan Oct 18, 2009 #4 Oct 18, 2009 #4 and make sure you have the correct springs. If you don't want springs that are set up for a roller cam, if you do that it will look like someone chewed on your cam and lifters and end up with Shavings throughout your engine.
BlownFiveLiter have car, will race....wait, it doesn't run 15 Year Member Nov 29, 1999 3,133 18 108 Chicagoland Oct 18, 2009 #3 Oct 18, 2009 #3 Just make sure it has the 302 HO / 351W firing order.
S sgarrelts01 New Member Apr 26, 2009 133 0 0 Niles, Michigan Oct 18, 2009 #4 Oct 18, 2009 #4 and make sure you have the correct springs. If you don't want springs that are set up for a roller cam, if you do that it will look like someone chewed on your cam and lifters and end up with Shavings throughout your engine.
and make sure you have the correct springs. If you don't want springs that are set up for a roller cam, if you do that it will look like someone chewed on your cam and lifters and end up with Shavings throughout your engine.