camber adjustment

ponyride94 · Aug 19, 2009

could I install camber bolts on my 94 mustang to get proper camber? I have a 2.5 neg. camber on the right front wheel.

Chythar · Aug 19, 2009

Sure, I've done that on my Mustang. The camber bolt goes in the top shock hole, they give you enough adjustment to get the wheel straight.

GTA_V6_Mustang · Aug 19, 2009

Chythar said:
Sure, I've done that on my Mustang. The camber bolt goes in the top shock hole, they give you enough adjustment to get the wheel straight.

+2 i did the same thing on mine worked just fine.

ponyride94 · Aug 21, 2009

I intstalled it yesterday, But I noticed that the camber went off again, maybe I didn't tighten the lower bolt enough?

Chythar · Aug 21, 2009

Both bolts need to be torqued down to spec. The new camber bolt should have the same torque as the original bolt - isn't it 110 ft/lb? Or is if 130? I don't remember offhand.

YEAHLOH95 · Aug 21, 2009

you probably didnt get it tight enough, can you mark it around the strut to see if its moving?

camber adjustment

ponyride94

New Member

Chythar

Recently finished repairing my rear

GTA_V6_Mustang

Active Member

ponyride94

New Member

Chythar

Recently finished repairing my rear

YEAHLOH95

Similar threads

camber adjustment

ponyride94

New Member

Chythar

Recently finished repairing my rear

GTA_V6_Mustang

Active Member

ponyride94

New Member

Chythar

Recently finished repairing my rear

YEAHLOH95

Similar threads

Privacy & Transparency

Privacy & Transparency