Can I still talk about Mustangs if I don't have one yet?

FirecrackerKTM said:

On the same note, I can't wait until the figure out FI for bikes.

Click to expand...

I think Canondale did but they went bankrupt. I would like to have seen a good American dirt bike.

FirecrackerKTM said:

1.)What I want to do is build a hot smallblock in a 67-8 'vert that will handle. What's out there, short-block wise? I built my own last time but I’m thinking about a crate engine this time. Then again, the building was the fun part, so maybe it’ll be just a kit.

2.) What’s the verdict on a small-block stroker vs. a street boss? Do people still do that? Where’s a current resource for the street boss intake manifold—if I recall correctly, wasn’t it special somehow?

3.) How about suspension/steering—I see a rack and pinion kit, I’m aware of the handling kit with the bigger swaybar and poly bushings. What else can you do to modernize the handling?

Click to expand...

1.) There are a number of crate engine builders out there that offer stout shortblocks. Since you have experience building your own engine, I would suggest doing it again. Getting mainstream engine builders to guarantee their stuff seems to be rather difficult. I assembled my engine from a kit and it makes quite a bit of power.

2.) I'm not familiar with a "street Boss." The bulk of the aftermarket part makers' attention is focused on the 289/302/351 Windsors. Edelbrock has aluminum 351C heads, but they cost about 2/3 more than Windsors.

3.) With the stock suspension and steering, there isn't exactly a wealth of aftermarket parts. Rack and pinion, Shelby drops, swaybars, springs, and braces are the majority of front end mods when using the stock setup. Mustang II suspension and coilovers are another story.

FirecrackerKTM said:

On the same note, I can't wait until the figure out FI for bikes. Tinkering with the damn jetting up here at 10k feet can be annoying.

Click to expand...

For KTMs, dirt bikes, or bikes in the broad sense? Generally speaking, EFI is old hat for road bikes. I ride also, but I'm on a Honda XR600. I'd love a KTM or Husky 4-stroke, though. Cannondale had the only EFI dirt bike I know of, but they went belly up as was said and ATK took over the production of replacement parts. Most Cannondales get parted out rather than sold whole.

Been damn near 18 years since i sold my last RUNNING classic Stang and look where I hang out now (see my post count ) Since I've been here, I've remembered many things I learned(over a nine year period from 1980 to 89. with that 67 big block fastback, that I thought I'd forgotten.

By all means talk. You can learn a lot about the hobby before you put the money into it so you can make the right educated purchases the first time. All of us have learned the hard way and made plenty of poor choices and wrong purchases.
Kevin

T-5 5 speed!

Depending on what vintage motor you choose, it's easy. And, You get a much taller first gear and overdrive. Most of us Cobra owners have either 3:55's or 3:73's out back, and with the OD, highway driving is still no problem. What rear do you have in the car? To to the T-5 or AOD swap, you will need a kit, plus shorten the driveshaft.

BTW, are you from Colorado? I have alot of family in Denver & Boulder.

Reason I ask about the rear, is that there is alot available for the 9", but it is uncommon to find in a 68, unless it is a 390 car. I swapped in a 9" out of a wrecked Mach into my 68. Stuff is available for the 8" rear, but much more uncommon. Hot trick is to find a 3:55 8" pumpkin from a v-6 Mustang II, as that's what I did in the 69 'Vert when I did a 5.0/AOD swap. What a difference!

My brother manages a Whole Foods store there!

How hot of a SBF. If you are talking 350+ HP/Torque I would suggest any of the TKO series or 3550. T5 is just fine for cruising and fairly mild power without power shifting and traction but after about 350 flywheel HP they start to snap. Depending on rear end gears the main difference between the tko 500 and 600 are the longer first gear on the 600. You can get a tko 500 to handle the same power as the 600 with a 26 spline input shaft.
Kevin

FirecrackerKTM said:

Wasn't the Versailles rear end a common swap in? I think that's what my mom's 68 CS has in it.

Click to expand...

Maybe back when Lincoln Versailles were common and the only way to get rear disc brakes. They're not rare(I had one in my '65), but you'll pay about as much for one as any other 9" with aftermarket disc brakes. The aftermarkets are ususally equal or better and Versailles rear brake parts are getting expensive. They were only sold for about 4 years.

Regarding a trans and gears, my personal favorites for a street Mustang are a Toploader and 3.50s with a T-Lok carrier. A 5-speed will allow more rear gear without as much sacrifice on the highway, however.

And then there are suspension choices, engine, dash, body, and more.

Welcome to the madness!

BTW, can you post more details about your Mom's GT/CS?