• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Can MAP or BAP interchange

  • Thread starter Thread starter gregsmy
  • Start date Start date Jan 31, 2008
G

gregsmy

Member
Jan 9, 2008
30
0
6
Jan 31, 2008
#1
  • Jan 31, 2008
  • #1
I was going over things and checking the previous owners work when I discovered that he has the original MAP sensor plugged into the connector for the BAP sensor but with no vacumn line attached. I have read that they are similiar in function but calibrated differently. Should I replace it? It has a "Painless" wiring harness and the connector is labeled BPS (barometric pressure switch?). I verified it by the part# on the sensor.
 

BlownFiveLiter

have car, will race....wait, it doesn't run
15 Year Member
Nov 29, 1999
3,133
18
108
Chicagoland
Jan 31, 2008
#2
  • Jan 31, 2008
  • #2
If it was once a speed density car that was converted to mass air, then yes, it should be fine. With the speed density, the MAP sensor provides input for how much fuel it estimates the car needs. Once it's converted, you leave the MAP open to the atmosphere and use it as a BAP sensor.
 
G

gregsmy

Member
Jan 9, 2008
30
0
6
Jan 31, 2008
#3
  • Jan 31, 2008
  • #3
Yes the drivetrain was from a 87 Lincloln VII LSC that was originally speed density. When he put the drivetrain into the truck he bought an aftermarket "Painless" wiring harness and a computer and mass air flow from a later model mustang.
 
You must log in or register to reply here.

Similar threads

Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
485
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
616
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
A
Electrical New O2 sensor harness has no jumpers (91/93)…
  • afjLX
  • Dec 11, 2024
  • Fox 5.0 Mustang Tech
Replies
4
Views
559
Fox 5.0 Mustang Tech Dec 13, 2024
afjLX
A
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
847
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
J
Electrical Code 22 - New BAP and resistances all good
  • JEllis1
  • Nov 13, 2022
  • Fox 5.0 Mustang Tech
Replies
5
Views
2K
Fox 5.0 Mustang Tech Dec 4, 2022
JEllis1
J
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?