• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Car missing

  • Thread starter Thread starter bradranger
  • Start date Start date Jul 20, 2006

bradranger

Member
Dec 30, 2003
50
0
17
Hollywood,Maryland
Jul 20, 2006
#1
  • Jul 20, 2006
  • #1
I have had this problem for a long time, my car will run fine when first started and will run good for the whole time, but when I cut the car off and restart it, it will start missing. So basically its has something to do when the car gets warm. At wot its fine also. Any suggestions? Could it be my tps sensor it is set at 1.05, thats is as low as I can get it, even with trimming.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jul 20, 2006
#2
  • Jul 20, 2006
  • #2
If it misses consistantly, I'd run a cylinder balance test while it does this. That'll help narrow down if one cylinder is acting up or if it's random.

Your TPS should be fine and within adaptive control.

Good luck.
 

Black1987Stang

Active Member
Aug 22, 2004
1,422
0
37
Jersey Shore
Jul 21, 2006
#3
  • Jul 21, 2006
  • #3
Mine had a similiar problem like that, im pretty sure it was the ECT, engine coolant temp sensor.....but now has magically stopped doing it but w/e...kinda funny cuz i would be driving to school and temp would still be warming up and would be running and missing, then all of a sudden (once the temps rose up) the engine ran awesome, missing stopped, all the power came back in an instant....pulled the codes n did get an ECT code, but now is gone n hasnt done it anymore


I would pull ur codes....and Jricker I believe "quoted" someone on some tps info, if it runs different right after u restart ur car, its the tps....or something like that.....
 

jrichker

StangNet's favorite TOOL
In Remembrance. Thank you for your contributions
Mar 10, 2000
27,512
2,813
234
Dublin GA
Jul 21, 2006
#4
  • Jul 21, 2006
  • #4
Dump the codes and see what the computer says is wrong… Codes can be present without setting the Check Engine Light.

Here's the link to dump the computer codes with only a jumper wire or paper clip and the check engine light, or test light or voltmeter. I’ve used it for years, and it works great.

See http://www.troublecodes.net/Ford/
OR
See http://www.mustangworks.com/articles/electronics/eec-iv_codes.html

IF your car is an 86-88 stang, you'll have to use the test lamp or voltmeter method. There is no functional check engine light on the 86-88's except possibly the Cali Mass Air cars.

Codes have different answers if the engine is running from the answers that it has when the engine isn't running. It helps a lot to know if you had the engine running when you ran the test.

Trouble codes are either 2 digit or 3 digit, there are no cars that use both 2 digit codes and 3 digit codes.

For those who are intimidated by all the wires & connections, see http://www.actron.com/product_detail.php?pid=16153 for what a typical hand scanner looks like. Normal retail price is about $30 or so at AutoZone or Walmart.

Or for a nicer scanner see http://www.midwayautosupply.com/detailedproductdescription.asp?3829 – It has a 3 digit LCD display so that you don’t have to count flashes or beeps.. Cost is $35.
 
You must log in or register to reply here.

Similar threads

Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
412
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
J
Lack of power on acceleration
  • jameshernandez
  • Aug 30, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
201
1996 - 2004 SN95 Mustang -General/Talk- Sep 6, 2026
jameshernandez
J
Engine Vacc leak detector
  • Creomod
  • Jul 19, 2026
  • Fox 5.0 Mustang Tech
Replies
4
Views
227
Fox 5.0 Mustang Tech Jul 25, 2026
Mustang5L5
J
i need help
  • JK.
  • Oct 24, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
646
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 28, 2026
JD1964
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
533
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?