• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

Car stalling after intake install??

  • Thread starter Thread starter Musty5.0
  • Start date Start date Apr 18, 2009
M

Musty5.0

New Member
Apr 13, 2009
26
0
0
Ontario, Canada
Apr 18, 2009
#1
  • Apr 18, 2009
  • #1
k i got a trickflow intake on my 95 gt and at first it wouldn't start at all then i noticed that the intake wasn't tightening up all the way so i knew unmetered air was getting in so i took it back off and gasket sealed it great car starts fine but now when i come to a light or a stop as soon as i put the clutch in it dies!! man its embarassing any ideas why its doing this to me??
 

Chythar

Recently finished repairing my rear
20+ Year Stangneter
Aug 26, 2004
2,374
140
113
Foothill Ranch, CA
Apr 18, 2009
#2
  • Apr 18, 2009
  • #2
Our car computers are finicky. Adding an intake can confuse it, since the airflow isn't what it thinks it should be. First off, you should run the computer's built-in KOEO and KOER tests. These tests will also tell you if there are any error codes in the computer. Next, I would go through this idle reset procedure to make sure your car idles properly. Once you've done this, report back and let us know what you found.
 
You must log in or register to reply here.

Similar threads

Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
273
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Distributor installed wrong
  • djj62478
  • Jun 14, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
288
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 21, 2026
CAMTWO1070
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
299
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
550
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
D
Running both lean and rich with O2 heat codes
  • Danceswithfire5
  • Aug 30, 2026
  • SN95 V6 Mustang Tech
Replies
1
Views
144
SN95 V6 Mustang Tech Sep 5, 2026
apple99Mustangdude
A
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?