• Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech

Car won't stop turning over

  • Thread starter Thread starter TC00GT
  • Start date Start date Jun 16, 2008
Prev
  • 1
  • 2
First Prev 2 of 2
D

D.Hearne

New Member
Sep 29, 2000
11,730
6
0
south louisiana
Jun 17, 2008
#21
  • Jun 17, 2008
  • #21
TC00GT said:
That's interesting, because when I jump started the car, it took a few shots for it to fire up, and the solenoid never stuck those few times, only when it was trying to turn over on it's own. I'll give the battery a good charge and test the solenoid. Thanks.

I just picked up a new battery charger, so I'll throw it on. I bought the battery last August, I only drove the car for a couple days (after sitting for 8 years, I got it running so I could use it in my wedding) then I stored it for the winter. I kept the battery on a tender for most of the winter. the battery should still be ok after a good charge right? I don't know how much a battery can take after being drained so often and not recharged. any idea?
Click to expand...

As for the battery being OK, only way to tell is test it. That or just give it a good slow overnight charge and see if it'll hold that charge over time. I'll bet that the battery's charge state is your problem. Solenoids do wear out, but not that often. Batteries wear out much faster. If that battery is 8 years old, I'd doubt it's still up to snuff.
 
T

TC00GT

Founding Member
Nov 9, 2000
104
0
0
Auburn, Ma
Jun 18, 2008
#22
  • Jun 18, 2008
  • #22
D.Hearne said:
As for the battery being OK, only way to tell is test it. That or just give it a good slow overnight charge and see if it'll hold that charge over time. I'll bet that the battery's charge state is your problem. Solenoids do wear out, but not that often. Batteries wear out much faster. If that battery is 8 years old, I'd doubt it's still up to snuff.
Click to expand...


The battery is less than a year old, but has been sitting on and off a battery tender for most of the winter. I plan on diagnosing the problem this weekend, I'll send an update on Monday. Thanks everyone.
 
Prev
  • 1
  • 2
First Prev 2 of 2
You must log in or register to reply here.

Similar threads

M
85 mustang 5.0 cranking in run position
  • Mamaclean
  • May 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
129
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 1, 2026
General karthief
L
2000 Mustang PATS - Broken Key and Wire - HELP!
  • Laree Taylor
  • May 7, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
10
Views
172
1996 - 2004 SN95 Mustang -General/Talk- May 12, 2026
manicmechanic007
N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
249
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
142
SN95 4.6L Mustang Tech Jun 19, 2026
melo.timo
M
B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
233
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1965 - 1973 Classic Mustangs -General/Talk-
  • Classic Mustang Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?