• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Carb Conversion Questions

  • Thread starter Thread starter rfd499
  • Start date Start date Mar 20, 2004
R

rfd499

New Member
Jan 10, 2003
3
0
0
Clayton, NC
Mar 20, 2004
#1
  • Mar 20, 2004
  • #1
I am considering converting my '93 LX to a carb. I am considering this because I believe it will be cheaper to tune and will make more topend hp. This car is not a daily driver. For all of you that switched to a carb are you glad you did? Have any of you used your efi fuel system with a 3 port return style fuel regulator? How did this set work for you? I am in the process of installing an e cam, ported e-7's and figured that if I do switch to a carb now is the time. I will be installing nitrous when I figure out which way I am going. Any info or reply is welcomed. Thanks
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Mar 20, 2004
#2
  • Mar 20, 2004
  • #2
I have yet to put my motor in the car (see sig). It was cheaper to do a carb, for my motor it cost alot more to do than a mild 302 would have. The stock efi lines are too small imho for a carbed set up, you need more volume than pressure, but you might be able to get away with it. I'm using an in-tank pick with a -10 an feed and a -8 an return with a bypass regulator. Good luck. FWIW, I got $250 for my harness/computer, sell them if you can.
mike.
 

393Bird

Founding Member
Jun 26, 2002
244
0
0
Clarksville Tennessee
Mar 20, 2004
#3
  • Mar 20, 2004
  • #3
I am just finishing mine, and with the mods you are planing, I agree with the above post, you will need bigger lines with the lower pressure system.

Here is what I did.

http://www.qsl.net/wd4ngb/birdwork5.htm

Good luck
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Mar 20, 2004
#4
  • Mar 20, 2004
  • #4
393bird, AWESOME site, superperbly detailed
awesome job.
mike.
 
R

rfd499

New Member
Jan 10, 2003
3
0
0
Clayton, NC
Mar 21, 2004
#5
  • Mar 21, 2004
  • #5
ttt
 

5.0 HOtrain

Founding Member
May 20, 2001
2,247
0
47
New Hampshire
Mar 21, 2004
#6
  • Mar 21, 2004
  • #6
rfd499 said:
ttt
Click to expand...

What else are you looking for? It looks like the majority of you questions were answered
 
You must log in or register to reply here.

Similar threads

D
Fuel Erratic Fuel Pressure 1985 GT
  • DienstXIV
  • Jan 14, 2026
  • Fox 5.0 Mustang Tech
Replies
16
Views
884
Fox 5.0 Mustang Tech Jan 16, 2026
AeroCoupe
Weber Carburetor tuning help
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
4
Views
207
1965 - 1973 Classic Mustangs -General/Talk- Jul 19, 2026
SchwarzStock
D
Engine 85 GT Backfires through Carb
  • DienstXIV
  • Oct 3, 2025
  • Fox 5.0 Mustang Tech
Replies
19
Views
897
Fox 5.0 Mustang Tech Oct 7, 2025
85GTStangGuy
Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
202
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
402
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?