• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Carb Help for 1985 FoxBody

  • Thread starter Thread starter FastKomute
  • Start date Start date Dec 20, 2007
F

FastKomute

New Member
Aug 23, 2007
5
0
0
Maryland
Dec 20, 2007
#1
  • Dec 20, 2007
  • #1
Evening / Morning Stangers,
Getting ready to put the ole ’85 back on the road, and all of the items listed in the sig are complete. After a quick blast down the road I discovered a dramatic hesitation when I stomp on it. This hesitation can also be replicated at idle.

A little history …
The car has been sitting for close to 10 years in my garage. Prior to that it was a daily driver. At that time, circa 1997, the crate motor was dropped in and the factory Holly was sent to Pony Carburetors, rebuilt reinstalled and performed very well.

The question is this – Because this car will again become a daily driver and I need to pass the confiscatory Maryland emissions, is there a replacement carburetor in the 600cfm range that I can purchase? I checked with Edelbrock and they advertise a 600cfm that is not emission legal.

FWIW – I am not discounting sending the carb back to Pony and having them rebuild it. I do not have the skill / time / patience to rebuild this on my own.

Thanks for any and all guidance.

Semper Fly
 

Fast63

New Member
Sep 20, 2007
717
0
0
Dec 21, 2007
#2
  • Dec 21, 2007
  • #2
what is wrong with the carb now? Maybe it doesn't need any rebuild...

If you are looking for a replacement for smog, there is only one way to go, and that is the Holley remanufactured one. You can get them at summitracing.com I got mine there, but be prepared, I had to send mine back because it started leaking gas externally and internally. They got it back to me and it works properly except the idle mixture screws turn on their own from road vibrations. I am not spending more money on shipping just for them to fix that so I will have to fix that myself.

Basically, they take the factory setup, rebuild it, but install a different baseplate that has only front idle mixture screws, instead of the BS 4 corner stuff on the factory ones. It comes with 59 jets. I smogged real nice with it.
 
F

FastKomute

New Member
Aug 23, 2007
5
0
0
Maryland
Dec 21, 2007
#3
  • Dec 21, 2007
  • #3
A significant hestitation <=1500 rpm.

Not completely positive the carb needs rebuilding, I am going to have it looked at later today. I just wanted to get a plan together in case the carb has indeed gone tango-uniform.

I checked out the Summit smog legal carb (HLY-64-3609). Sux that you had so many issues with yours, we’ll see how it goes.

Thanks for the reply.
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Dec 21, 2007
#4
  • Dec 21, 2007
  • #4
with the engine off, air cleaner off. look down the carb while snapping the throttle. do you see fuel squirt in to the barrels?? if not, the accelerator pump is probably bad.
 
F

FastKomute

New Member
Aug 23, 2007
5
0
0
Maryland
Dec 21, 2007
#5
  • Dec 21, 2007
  • #5
Okay, I'll check it out. If it is the accelerator pump then can I assume a rebuild is in order or is a replacement a better route?

thanks
 

cjones

Founding Member
Jul 20, 2002
1,561
0
37
Avondale, AZ
Dec 22, 2007
#6
  • Dec 22, 2007
  • #6
not always. check the mechanical parts for it and it's adjustment. you can replace it without doing a rebuild.
 

Fast63

New Member
Sep 20, 2007
717
0
0
Dec 22, 2007
#7
  • Dec 22, 2007
  • #7
I forgot to mention in my original post to check for vacuum leaks since the car has been sitting so long. Some of the hoses could have been chewed through or just rotted.

Sorry, I also had a memory relapse of your hesitation problem :-\ If you do go with the factory replacement from summit, let me know how yours turns out.
 
You must log in or register to reply here.

Similar threads

L
FORD CARS STALLING WHILE DRIVING!
  • lunaelement
  • Apr 2, 2007
  • 1994 - 1995 Specific Tech
Replies
4
Views
15K
1994 - 1995 Specific Tech Apr 3, 2007
lunaelement
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?