Greetings from the U.K.,
Just a short and to the point question regarding the relays in the ccrm, are the relays just the run of the mill standard relay or are they fitted with resistors or any other such things, my main concern is over the pcm power relay. Thanks.
Bill
Suggestion. Open the CCRM and look at the part numbers on the relay itself. But you are aware the relays are soldered to a printed circuit board right?
I replaced the relay for a plain direct switching one it was only much later that I began to wonder if it had any special extras.
The car it’s from, with “the stig” posing beside it
I’ll write up what I did to repair the ccrm, don’t know why I didn’t do it before, and hopefully it may help someone with similar issues, just wish now that I had took photos of the steps taken.