• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech

changing fuel filter

  • Thread starter Thread starter 94 BLU GT
  • Start date Start date Aug 2, 2005
9

94 BLU GT

New Member
Nov 19, 2004
16
0
0
Vancouver
Aug 2, 2005
#1
  • Aug 2, 2005
  • #1
My car (94 GT) seems to be running lean at higher rpms and sometimes on a fast start off the line it boggs. I ran my car out of gas awhile ago, and thats when this all started. SO I figure the first thing I should do is change the fuel filter, as its something that should probably done anyways. The only problem is I am not that mechanically inclined and I have never done a fuel filter before. SO does anyone know of anything online with some procedure, step by step, pictures or anything that would help me out, or if any of you have any tips before I **** up my car it would be appreciated.
 

Mustangless

Member
Jun 27, 2003
903
1
18
home
Aug 2, 2005
#2
  • Aug 2, 2005
  • #2
The fuel filter is between the gas tank and axle. First you have to pop off or break off the clips on each side and pull the hoses off. Be carefull, there will be lots of gas coming out. After that you have to lossen the band around the filter and pull it out.

You might want to go pick up a haynes manual, not sure if it tells you how to or not.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Aug 2, 2005
#3
  • Aug 2, 2005
  • #3
One can depressurize the fuel system first. Check that the new filter includes new hairpin type clips before breaking the old ones (a flatblade screwdriver and/or needlenose pliers normally take care of the clips).

Good luck.
 

Mathulus

New Member
Jun 26, 2005
14
0
0
Lowell, MA
Aug 2, 2005
#4
  • Aug 2, 2005
  • #4
yeah haynes manual gives a good breakdown of it... depressurizing helps alot to. switch the inertia switch ( little red button in the trunk) which kills the fuel pump. then you start the car and run it til it dies. granted some gas will still come out, but it wont spray at you lol. gl its pretty easy to do
 

Kevin R.

New Member
Jun 3, 2004
473
0
0
Ohio
Aug 2, 2005
#5
  • Aug 2, 2005
  • #5
Funny story since this was brought up.

I decided to change my fuel filter about a week ago, don't remember why I decided to, just did.

So I pull it into a bay at a dealership where i detail cars, spot it easily, and pop one of the rubber hoses off. Depressurizing a gas tank was apparent to me, well, not then. So, gas is all over my clothes now, and I have 5 hours left of work, I figure WTH and keep going.

We get it off, get the new one on, and then realize we broke one of the plastic "pins" that hold the hoses on. So, with 1/2 hour to go until NAPA closes, my buddy runs and gets a 5-pack. Comes back, and we're good to go. My buddy (this says a lot for Honda mechanics) is the one who put the new clip in and put those hose on.
A (smarter) mechanic had earlier said there is no way we should be able to pull this hose off if put on properly....

So, to test its strength, I pull on the hose. At eye level, pressurized gas comes SHOOTTTING out on my face, eyes, body, etc. Don't know if any of you have had the pleasure of gas in the face, but that **** burns.

Turns out the genious Honda mechanic hadn't put the clip over the little nipple in the line. 15 seconds later, and one kid with his head in the sink, and it was done.

Funny now, then, that **** hurt.
 

slo65

New Member
May 26, 2003
448
0
0
Southern California
Aug 2, 2005
#6
  • Aug 2, 2005
  • #6
yea i work at an oil change place, we frequently do fuel filters, just make sure the keys out of the ignition, release the gas cap, i didnt do that when i did my fuel filter a while back, it was my first time ever doing one, i just took off the line farthese from me, and the gas shot out away from me, yippie
 

91LX_5L

Founding Member
May 13, 2002
1,943
0
36
British Columbia
Aug 3, 2005
#7
  • Aug 3, 2005
  • #7
I've got it my eyes twice chaning them... man that burns
 

tim95gt

Member
Jun 26, 2005
44
0
16
Kernersville, NC
Aug 3, 2005
#8
  • Aug 3, 2005
  • #8
just do what has been posted earleir and you should be fine, I actually had to remove one of the bolts and loosen the other bolt that holds the fuel filter mounting braket to get mine off, as the lines were in the way to keep it from slideing out after loosening the clamp, but the whole process is not hard,

I also managed to get gas in my eyes when I rotated the bracket down with the filter in it, not a pleasant feeling
 
You must log in or register to reply here.

Similar threads

I
1994 Cobra - Fuel Pressure Drops Revving at Idle
  • IconicSilverGT500
  • Apr 11, 2026
  • 1994 - 1995 Specific Tech
Replies
16
Views
436
1994 - 1995 Specific Tech Apr 24, 2026
Mcmahst
D
Is this a fuel filter?
  • Dutch74
  • Oct 2, 2025
  • 1974 - 1978 Mustang II Talk & Tech
Replies
7
Views
313
1974 - 1978 Mustang II Talk & Tech Oct 21, 2025
welder4956
L
1997 V6 Starting issue
  • leanzik04
  • Mar 20, 2026
  • SN95 V6 Mustang Tech
Replies
3
Views
247
SN95 V6 Mustang Tech Mar 20, 2026
Noobz347
2
02 mustang gt crank no start
  • 2v.cjmullis
  • Jan 28, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
5
Views
342
1996 - 2004 SN95 Mustang -General/Talk- Jan 30, 2026
Noobz347
I
98 Mustang GT dying
  • ItsMason
  • May 14, 2026
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
3
Views
126
1996 - 2004 SN95 Mustang -General/Talk- Jun 25, 2026
lenzgt
L
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 1994 - 1995 Specific Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?