• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Check Oil Light

  • Thread starter Thread starter dbdragracing
  • Start date Start date Nov 30, 2005

dbdragracing

Member
Dec 1, 2004
397
2
18
Nov 30, 2005
#1
  • Nov 30, 2005
  • #1
My check oil idiot light keeps coming on....my car has oil pressure (gauge says its ok) and plenty of oil. The car seems to run fine. Im thinking its the sender for the gauge and I should replace it....is it the thing thats screwed into the side of my oil pan? Also, how do you check to see if you oil pump is working ok other than looking at the stock gauge? Thanks.
 

86mustang5.oh

New Member
Apr 5, 2005
125
0
0
battle creek mi.
Nov 30, 2005
#2
  • Nov 30, 2005
  • #2
sending unit? back of oil pan drivers side
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Nov 30, 2005
#3
  • Nov 30, 2005
  • #3
I wonder if the OP gauge and Low oil level light are being confused.

We have a low level light. We have a OP gauge.

If you say the OP gauge reads fine, it sounds like the sender for said gauge is ok.

Your oil level switch might have come apart or it might have a build up of crud on the contacts.

Good luck.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Nov 30, 2005
#4
  • Nov 30, 2005
  • #4
Im having trouble with the oil level light....it stays on. Im guessing the sender is bad...is the sender for this located on the passenger side of the oil pan? Thanks.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Nov 30, 2005
#5
  • Nov 30, 2005
  • #5
The sender for the low oil light is on the driver side of the pan on mine. It has a couple wires coming out of it (it is a large sender - it takes like a 20mm bolt to plug the hole). LRS sells new sending units for the low oil light.

Good luck.
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Nov 30, 2005
#6
  • Nov 30, 2005
  • #6
dbdragracing said:
My check oil idiot light keeps coming on....my car has oil pressure (gauge says its ok) and plenty of oil. The car seems to run fine. Im thinking its the sender for the gauge and I should replace it....is it the thing thats screwed into the side of my oil pan? Also, how do you check to see if you oil pump is working ok other than looking at the stock gauge? Thanks.
Click to expand...
the low oil light comes on when the sensor isnt covered with oil. if you park on a steep incline and are a little low(half quart +) your light will come on or you have a bad sensor. yes... the thing in the side of the pan. the only real way to check oil pressure is with a manual guage.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Nov 30, 2005
#7
  • Nov 30, 2005
  • #7
How do I check with a manual gauge? Thanks.
 

troyGT03

New Member
Feb 22, 2004
278
0
0
too close to memphis,tn
Nov 30, 2005
#8
  • Nov 30, 2005
  • #8
the easiest way is to remove the stock oil pressure sending unit just above the oil filter and screw in a guage.
 

dbdragracing

Member
Dec 1, 2004
397
2
18
Nov 30, 2005
#9
  • Nov 30, 2005
  • #9
Just use a pressure gauge from the parts store? Thanks.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
33
129
Nov 30, 2005
#10
  • Nov 30, 2005
  • #10
dbdragracing said:
Just use a pressure gauge from the parts store? Thanks.
Click to expand...
That would work. A mech gauge would be easiest and most accurate for this testing IMHO.

Good luck.
 
You must log in or register to reply here.

Similar threads

Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
42
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
B
Engine Strange Noise
  • burntokita
  • May 8, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
339
Fox 5.0 Mustang Tech May 11, 2026
keel
B
Engine Another no start after washing engine bay
  • bruno
  • Apr 26, 2026
  • Fox 5.0 Mustang Tech
  • 2
Replies
24
Views
487
Fox 5.0 Mustang Tech May 7, 2026
AeroCoupe
Progress Thread Sask84gt's 84 GT - Questions and Progress Thread
  • Sask84gt
  • Oct 13, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
22
Views
483
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jun 6, 2026
Sask84gt
Engine 87 NA - Tune or no Tune needed?
  • R82148V
  • Sep 17, 2025
  • Fox 5.0 Mustang Tech
Replies
8
Views
316
Fox 5.0 Mustang Tech Sep 17, 2025
R82148V
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?