• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Clear Fog Light Conversion Complete w/ 50watt bulbs

  • Thread starter Thread starter 02gt714
  • Start date Start date Apr 9, 2005
0

02gt714

New Member
Jun 19, 2003
21
0
0
Frederick, MD
Apr 9, 2005
#1
  • Apr 9, 2005
  • #1
Hey guys, I just finished putting on the clear fogs on my 02 Gt. Beautilful during the night, but sucked a** as night thanks to the 37.5watt 899 bulb. I looked through out the owners manual, and found that the fog circuit uses a 15amp fuse. After doing some research from aftermarket lighting like hella, and piaa, found that they also use 15amp fuses for their dual 55watt H4 bulbs. This info told me that it would be safe to install 50watt bulbs on the circuit. Also compared the wiring, and the wiring is about the same gauge. I just wanted to share this info incase anybody had any neg. comments/incounters about running higher wattage lights. I added 885 sylvania's (standard) and what a difference those 50watters made. I can see!!! The light pattern is 100% better then stock. I'm really not to concerned about the wiring / fuses, so much as I am worried about the tight quarters the bulbs are in, as in distance from the bottom and top of the reflector w/ the extra heat generated from the 50watt. If anybody has any good or bad thoughts, please let me know. If you would like pics, I'll try to attach em. If I had to do it again.....I would have done it 2 years ago.
 
0

02gt714

New Member
Jun 19, 2003
21
0
0
Frederick, MD
Apr 9, 2005
#2
  • Apr 9, 2005
  • #2
Correction - 20Amp fuse.
 

topless98gt

Adhesive Feces
Mar 31, 2005
182
0
17
Arlington, TX
Apr 9, 2005
#3
  • Apr 9, 2005
  • #3
This seems like something I would want to do pretty soon in the future. But first, I need to rewire my fog lights to stay on with my parking lights
 

Spreadman

two wheels
Founding Member
Nov 29, 1999
10,904
3
0
Houston, TX
Apr 9, 2005
#4
  • Apr 9, 2005
  • #4
I've been running 50 watt fogs for 2 years now. No issues.

Which housings did you use?
 

Mustang5L5

That is…until I whipped out my Bissell
Mod Dude
Feb 18, 2001
43,248
17,929
224
Massachusetts
Apr 10, 2005
#5
  • Apr 10, 2005
  • #5
With the stock 37.5W bulbs, you would have 3.125 AMPs of draw. Stepping up to a 55W bulb you now have 4.5AMPS. That is for one single lamp so it would be 6.25AMPs and 9 AMPs. That would increase with heat as well.

Is the 20 AMP fuse a dedicated fog light fuse? Or are there other circuits on it?

Technically you are supposed to protect #14 wire with a 15 amp fuse and #12 wire with a 20 amp fuse. The fog light wiring does appear to be one of those 2 sizes but i cannot tell, so i'll assume for the moment it's #12. That means its rated for 20-25 AMPS depending on the wire type.

Under those assumptions, it is technically safe to run the higher wattage bulb although your housings may melt.

But like i said, i made a few assumptions. For all i know it's #18 wire with a 20amp fuse shared by the parking lights...which changes everything.
 
0

02gt714

New Member
Jun 19, 2003
21
0
0
Frederick, MD
Apr 10, 2005
#6
  • Apr 10, 2005
  • #6
The 20amp fuse is also used for the Daytime Running Lights package for the canadian vehicles. So since I am not running DRL, and nothing else is running on that circuit, I think I'm pretty much safe. If I were to add additional items to that circuit, I would drop the wattage down. If what you say is factual, you must also remember one thing, if it is 18gauge, it should only be going to 1 light running 4.5amp then to the relay, then the other is the same, 18-4.5amp to relay. These wires meet up to the relay, and I believe it is a SPDT. so it has 2out leads. If anything should fail, it would most likely be the relay. Again, this is from my understanding, but I may be wrong. This would atleast be the ideal way if ford did infact build it this way with the SPDT. So I think I'm in the clear for the wiring. But thinking about it now, I'm going to have the check the relay.

SpreadMan-
Im running the Clear Fogs from Mustang Tuning - 79.99 + Shipping.
 
K

kolkid

New Member
Mar 30, 2005
79
0
0
Apr 10, 2005
#7
  • Apr 10, 2005
  • #7
i wanna put some clear fogs on my car too... problem is that my car doesnt have any fogs in it period do any of u guys know where to get the wiring kit for it along with some cobra clear fogs
 

GT-03

Member
Dec 12, 2003
630
1
16
Apr 11, 2005
#8
  • Apr 11, 2005
  • #8
02gt714 said:
I just wanted to share this info incase anybody had any neg. comments/incounters about running higher wattage lights.
Click to expand...

The clear fog light housing, I used, had a warning against using any bulb higher than 37.5 watts. Supposedly, the housing might start to melt with any additional heat beyond. that.

So, I stuck it the standard bulbs. I don't know if their warning is true, or just CYA.
 
You must log in or register to reply here.

Similar threads

1998 Convertible, Wiring Fog Lights as DRLs...
  • a_bartle
  • Mar 9, 2019
  • SN95 V6 Mustang Tech
Replies
0
Views
844
SN95 V6 Mustang Tech Mar 9, 2019
a_bartle
A
Halo fog light wiring
  • Andy P.
  • Jun 20, 2019
  • 2005 - 2014 S-197 Mustang -General/Talk-
Replies
1
Views
2K
2005 - 2014 S-197 Mustang -General/Talk- Jun 30, 2019
JmP6889928
H
2000 Gt Fog Light Bulb Upgrades
  • Hwystar1
  • Dec 26, 2017
  • 1996 - 2004 SN95 Mustang -General/Talk-
Replies
1
Views
852
1996 - 2004 SN95 Mustang -General/Talk- Dec 27, 2017
Mattstang04
fixing dashboard lights + engine response .
  • ked263
  • Dec 28, 2012
  • SN95 4.6L Mustang Tech
Replies
2
Views
911
SN95 4.6L Mustang Tech Dec 28, 2012
ked263
S
Lighting Problems
  • svt_gEEk
  • Oct 19, 2009
  • SN95 4.6L Mustang Tech
Replies
7
Views
2K
SN95 4.6L Mustang Tech Oct 19, 2009
wmburns
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?