clearing cel codes

[smittyb]

I can't seem to clear my KAM codes. I tried pulling the jumper during the test(twice), turning the key off during the test, and pulling the batt cable during the test. Nothing has worked. I cleared the CM codes, but can't get the KAM codes to go away. What am I missing here?

 

[jrichker]

Disconnect the battery for 20 minutes. That will clear everything.

 

[smittyb]

It didn't.

 

[I_AM_CANADIAN]

Maybe try it again? I know that clearing it for 20 minutes has cleared EVERYTHING for me.