• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Bolts

  • Thread starter Thread starter 69Rcode_Mach1
  • Start date Start date May 11, 2005

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
May 11, 2005
#1
  • May 11, 2005
  • #1
Hey guys I am going to be dropping in my engine and tranny this weekend. Problem is I need the bolts that mount the pressure plate to the flywheel. I went to ford for them. I was told I need 6, but unfortunately they each cost $7.50. Is there any cheaper alternative that you guys recommend. I don't want to pay $50 for a bolt and nut. That is ridiculous.
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
May 11, 2005
#2
  • May 11, 2005
  • #2
Does nobody know the answer to this question?
 

Jason 302

10 Year Member
Aug 9, 2003
685
71
68
Newark, Ohio
May 11, 2005
#3
  • May 11, 2005
  • #3
I just ordered some ARP's for mine. Not sure how much they were, but I don't think they were $7.50 a piece, and I'm sure a lot stronger. I can get the price and part number for you if you like. Jeg's can get them to me next day, but we're in the same state so I don't know how long it would take to get to you. I think they were back-ordered too. Best bet might be to just get some grade 8 bolts at your local hardware store.
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
May 11, 2005
#4
  • May 11, 2005
  • #4
That is what I was thinking. I can't imagine I would need something better than grade 8.
 

86T-Top

Founding Member
Jun 29, 2001
553
0
17
Dublin, PA
May 11, 2005
#5
  • May 11, 2005
  • #5
Go to the hardware store and get 6 grade 8 bolts and 6 lock washers.

OR.....

5.0 resto www.50resto.com has the pressure plate bolt kit which includes 6 bolts with lock washers and 3 dowel pins. It is priced as $12.95 in my 2004 catalog, part # HDW-7563. Not sure if the price changed in 2005.

Mario
 

69Rcode_Mach1

Active Member
Apr 20, 2004
1,473
1
37
Salt Lake City, Utah
May 11, 2005
#6
  • May 11, 2005
  • #6
I would order that kit from 5.0 resto but I need them here by friday. What length do the bolts need to be? Would it be okay for me to cut them down?
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
May 11, 2005
#7
  • May 11, 2005
  • #7
i believe that David (5 Spd GT) has posted the part numbers for those bolts.

I would NOT cut bolts down for anything on a clutch (there are some impressive forces involved, as well as balance issues on something that rotates at such speeds).

good luck.
 

5spd GT

"the 5.0 owns all"
Founding Member
Aug 7, 2002
9,516
6
99
Arkansas
May 11, 2005
#8
  • May 11, 2005
  • #8
HISSIN50 said:
i believe that David (5 Spd GT) has posted the part numbers for those bolts.

I would NOT cut bolts down for anything on a clutch (there are some impressive forces involved, as well as balance issues on something that rotates at such speeds).

good luck.
Click to expand...

Yep, that was me

Ford Pressure Plate Bolts and Flywheel Dowel Pin Set - 397-M-6397-A302

I would go to your local dealership if you need them ASAP...they can get them that next morning if need be. Some online "shops" have to backorder them...

I have ordered a ARP set (they may have been the "7.50" set) and they didn't work...they wouldn't thread in all the way...they weren't metric like the threads need...but Jason 302 may have ordered the right ones...if so give me the part number when they come in

Edit: Yeah I have used 50resto.com's bolts and they work just fine
 

tunedin302

I AM the law!!!
Jul 29, 2004
1,251
2
36
Pennsylvania
May 11, 2005
#9
  • May 11, 2005
  • #9
Do 50resto and overnight shipping
 
You must log in or register to reply here.

Similar threads

L
2006 mustang gt has high clutch bite
  • leevikisley
  • Feb 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
285
2005 - 2009 Specific Tech Feb 22, 2026
leevikisley
L
Alternator not charging
  • SchwarzStock
  • Jul 6, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
3
Views
263
1965 - 1973 Classic Mustangs -General/Talk- Oct 17, 2026
SchwarzStock
R
Drivetrain Clutch
  • Robman8028
  • Jun 29, 2025
  • Fox 5.0 Mustang Tech
Replies
4
Views
362
Fox 5.0 Mustang Tech Jul 2, 2025
AeroCoupe
S
Drivetrain 8.8 Pinion and 302 rear main seal leaks after replacing. 93 5.0 with t-5
  • Steigy4827
  • Jun 23, 2025
  • Fox 5.0 Mustang Tech
Replies
10
Views
884
Fox 5.0 Mustang Tech Apr 1, 2026
Steigy4827
S
6
Hey all,I’m putting together a 302 for my 1968 Mustang and wanted to post the combo + some questions to make sure I’m not missing crucial
  • 68_Disgustang
  • Feb 22, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
5
Views
1K
1965 - 1973 Classic Mustangs -General/Talk- Oct 19, 2026
mattcrp1
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?