• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Clutch Fork Pivot Stud

  • Thread starter Thread starter The Shape
  • Start date Start date Nov 1, 2005

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Nov 1, 2005
#1
  • Nov 1, 2005
  • #1
Is this a wearable item that you need to replace when installing a new clutch??
 

bubba-dough

Active Member
Dec 28, 2004
1,044
2
38
Indiana
Nov 1, 2005
#2
  • Nov 1, 2005
  • #2
Doesn't usually need to be replaced however if it is noticable worn or the car is high mileage it is not gonna hurt to change it. They aren't expensive.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 1, 2005
#3
  • Nov 1, 2005
  • #3
James, if doing all that work, it is worth the 10 bucks or so for a new one. D&D/Walsh Racing in Wixom should have all the little nickel and dime stuff like that.

So you are going to do it, huh? Cool!
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Nov 1, 2005
#4
  • Nov 1, 2005
  • #4
HISSIN50 said:
James, if doing all that work, it is worth the 10 bucks or so for a new one. D&D/Walsh Racing in Wixom should have all the little nickel and dime stuff like that.

So you are going to do it, huh? Cool!
Click to expand...


Yeah I'm going to go ahead and swap it out. I am just now gathering parts. I think I will go ahead and get a new pivot stud and call it good. Did you see my post about the index plate JT??
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Nov 1, 2005
#5
  • Nov 1, 2005
  • #5
I just saw it and think I agree with the replies that it is fine (unless those plates are dirt cheap, which I doubt). I have not used a bent up one though (I have had them a little wavey - but the metal was pretty springy).

Since you have eyeballed it, I cant imagine any issues though. Do take that for what it is worth though (it is nice to hear from folks whose were mangled).

Good luck James! Cool stuff!
 

The Shape

Founding Member
Jan 11, 2002
2,224
8
49
East ARKANSAS Delta
Nov 1, 2005
#6
  • Nov 1, 2005
  • #6
I would say this one is probably more on the wavey side rather than having an actual crease in it. I figure it should be cool.
 
You must log in or register to reply here.

Similar threads

N
Vibration after new clutch
  • nipple_looker
  • Sep 20, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • 2
Replies
23
Views
715
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Sep 26, 2026
fasterthangas
F
4
Drivetrain Wilwood Clutch and Brake Pedal Combo Installation - Help
  • 427stang
  • Jul 8, 2026
  • Fox 5.0 Mustang Tech
Replies
0
Views
126
Fox 5.0 Mustang Tech Jul 8, 2026
427stang
4
00 4.6L V8 new clutch won’t go into gear when on?
  • Timboslice
  • Aug 15, 2026
  • The Welcome Wagon
Replies
3
Views
234
The Welcome Wagon Aug 21, 2026
Noobz347
WTB Wanted - Foxbody clutch pedal
  • TTSaleen
  • Aug 4, 2026
  • Want to Buy
Replies
3
Views
203
Want to Buy Aug 6, 2026
General karthief
D
Mustang not starting
  • Dawry Ramos
  • Sep 12, 2026
  • 2015 - 2023 Specific Tech
Replies
10
Views
404
2015 - 2023 Specific Tech Oct 3, 2026
Dawry Ramos
D
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?