I put a T-5 in my '68 coupe in january. The clutch has slipped since day one. I checked to make sure the bolts were tight and that there was no grease ont he flywheel and such. Any ideas?
clutch slip
- Thread starter skywalker
- Start date
pabear89
Active Member
No play in the throw out bearing?
Got a cable clutch and I've adjusted it a good bit...but it slips in every gear...particularly bad in 5th. It's slipping to much for a cable adjustment. Throw out bearing is good as far as i can tell.
pabear89
Active Member
How much Free Play is in the clutch?
If the Throwout bearing is not completely backing off the pressure plate
then it could be your slipping problem.
PB
If the Throwout bearing is not completely backing off the pressure plate
then it could be your slipping problem.
PB
pabear89
Active Member
There's your problem.skywalker said:
your petal should travel 1-11/2 inches before you have bearing pressure on the plate.
readjust your linkage.
PB
