I found a real good deal on a 5.0 cobra intake manifold, injectors, fuel rails, and heads, supposedly off a cobra motor, anyone know what casting numbers i should look for on the heads to verify what they actually are? thanks
I found a real good deal on a 5.0 cobra intake manifold, injectors, fuel rails, and heads, supposedly off a cobra motor, anyone know what casting numbers i should look for on the heads to verify what they actually are? thanks
gt would be written near one of the mounting bolts on either side of the head. and its dark in my room and i cant see the 3 bars so yeah (hehehe head sitting on my floor)
There is no cobra head...the 93 "cobra" used a GT40 iron heads and different cam than the GT's. The cam ford used for the cobra edition and it's computer are considered mediocre..with the computer having conservative timing curve and the cam a little soft as well compared to the GT's. The iron GT 40 heads can be found all over..they are reliable and a nice kick over the stockers..even better ported.
thanks for the info I didnt know the Cobra used FMS Iron GT40 heads cause I knew they used Cobra intake and not GT40's although the bottoms are probably the same.