Code 96...How to Resolve? Fuel Pump Circuit Issue?

91StangGT5.0

Member

Oct 21, 2009

162

0

17

Mar 30, 2010

#1

• Mar 30, 2010

• #1

I hear my Fuel Pump prime when I turn the key, but I'm getting a KOEO code 96 and have no idea as to what it could be relating to. I do notice when I turn my car on it will sometimes start up and sputter down like it's going to do but if I give it gas it goes away and runs normal. If I do nothing sometimes it dies or goes back to idling normal.

 

liljoe07

5 Year Member

Feb 18, 2009

1,622

363

124

Cartersville,Ga

Mar 30, 2010

#2

• Mar 30, 2010

• #2

Memory code? Or No?

Is this the car your screen leads to believe?

 

91StangGT5.0

Member

Oct 21, 2009

162

0

17

Mar 31, 2010

#3

• Mar 31, 2010

• #3

My code reader read it as continous memory so yes I guess so. It came up on a KOEO test.

 

liljoe07

5 Year Member

Feb 18, 2009

1,622

363

124

Cartersville,Ga

Mar 31, 2010

#4

• Mar 31, 2010

• #4

Clear the codes. Drive it around for a day or two. Then run the codes again. At this point I wouldnt worry about it. If it comes back, thats a different story.

 

91StangGT5.0

Member

Oct 21, 2009

162

0

17

Apr 1, 2010

#5

• Apr 1, 2010

• #5

liljoe07 said:

Clear the codes. Drive it around for a day or two. Then run the codes again. At this point I wouldnt worry about it. If it comes back, thats a different story.

Click to expand...

My car runs fine. It's just after I've got the engine warm and drive it for a bit then turn it off and turn it on again a couple minutes later the rpms go up and down acting like it's going to stall, most of the time it does. If I give a little gas when it happens it idles fine after that.

 

liljoe07

5 Year Member

Feb 18, 2009

1,622

363

124

Cartersville,Ga

Apr 1, 2010

#6

• Apr 1, 2010

• #6

I'd go over the 10 pin connectors first. Make sure the terminals are clean and making good contact.