Hi Its been while but I am having trouble with a client's SN95 Stang. Costumer stated that they swapped a 5 Speed tranny from a Automatic but still using same EEC computer from the Automatic Transmisson also noticed that VSS Veihicle Speed Sensor is unplug or no working. MY question is are Manual and Automatic EEC computers interchangeable??
The probem with the Stang is that ignition cuts very quickly like for second then grabs again specially when when I put a load on throttle, To be more specific if feels like the rev limiter issue but this problems happen at all RPM Example #3, 4, and sometimes even 5 RPM. All ignition components have been replace with new unit and still problem duplicates. Thanks in Advance and please let me know if anybody know what could cause this issue
The probem with the Stang is that ignition cuts very quickly like for second then grabs again specially when when I put a load on throttle, To be more specific if feels like the rev limiter issue but this problems happen at all RPM Example #3, 4, and sometimes even 5 RPM. All ignition components have been replace with new unit and still problem duplicates. Thanks in Advance and please let me know if anybody know what could cause this issue