• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Convertible Rear Quarter window help

  • Thread starter Thread starter subcreep
  • Start date Start date Sep 13, 2004

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Sep 13, 2004
#1
  • Sep 13, 2004
  • #1
I have a problem with both rear quarter windows in my '92 LX. When I click down on the window switches the windows go down, but neither window will come back up. I can hear the motor running, but the windows don't even flinch. I ran across another thread that discussed this problem (http://forums.stangnet.com/showthread.php?t=409243&highlight=rear+quarter+windows), but I still have some questions.

1.) I do not have switches on my rear speaker grilles for the rear quarter windows. When I remove the speaker grilles I do not see the motor.

2.) I tried to remove the whole rear quarter interior piece, but it almost seems like I have to take out the whole rear seat to get the thing out.

3.) With all of the hurricanes that have been rolling through here lately, I'm going to end up having to replace my whole interior because the passenger quarter window isn't coming back up all of the way even with manual "tugging".

Is anybody familiar with repairing these windows? I'm ready to solve this problem and move on to the next (weather-stripping).
 

LASTFOX

Member
Jul 21, 2003
105
0
16
RI
Sep 13, 2004
#2
  • Sep 13, 2004
  • #2
This Ford Conv. Top manual helped me out alot with adjs. Definitely worth the $20. http://www.mustangsunlimited.com/itemdy01.asp?T1=MP14A+01&Category=Literature&CatKey=74-01
 

Psydwaze

Founding Member
Oct 10, 2001
661
0
16
Sacramento, CA
Sep 13, 2004
#3
  • Sep 13, 2004
  • #3
Mine didn't do the up/down thing,but had stopped working. The OEM bushings basically fell apart.

Ford has a replacement gear set but I went the extremely cheap route and bought a length of UHMW (plastic) rod from my local plastics shop and cut some pieces to replace the busted up bushings.

Once you pull the interior panel you should see, three nuts that hold the motor in place.

Remove these and lift the motor out from the top.

I replaced the brushes in one of motors but I don't remember if you have to pull the rotating assembly to get to the gear area.

You might be able to just remove the three screws and lift off the cover plate.

With the cover plate off you will see a greasy mess with chunks of plastic/rubber and a rounded triangle in the middle.

Clean this out as best you can.

I took some rough dimensions from one of the larger pieces and cut three pieces of rod to match.

You need to hold the three new bushings in place as the triangle is lowered back onto the gear.

I didn't get a very tight fit with the UHMW and there is some obvious play in the gears but the windows roll up and down.

The Ford replacements were like $30 or $40 and the UHMW cost about $1. I even had enough to fix three windows.
 
D

DUBI337

New Member
Dec 1, 2002
26
0
0
Cortlandt Manor, NY
Sep 14, 2004
#4
  • Sep 14, 2004
  • #4
about quarter panels

similiar story, but mine was from my friends hopping in and out of my vert. they stepped on the actaul quarter panel glass when i stuck out a little and the window trac bar actaully snapped! I found an entire quarter panel setup with the window trac bar and had my loval mechanic @ NEWMANS AUTO install it. easy install... just thought i'd throw my .02 -brian
 

subcreep

New Member
Dec 1, 2003
30
0
0
Jax, FL
Sep 14, 2004
#5
  • Sep 14, 2004
  • #5
Thanks for the help everybody, now I have a project for the weekend.
 
You must log in or register to reply here.

Similar threads

B
Rear quarter window regulator
  • BADAZZOMBIE08
  • Mar 29, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
100
2005 - 2009 Specific Tech Mar 29, 2026
BADAZZOMBIE08
B
Rear window failure
  • Moondog2178
  • Jul 22, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
6
Views
257
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 22, 2025
Moondog2178
J
WTB Help!!! Need to find interior rear quarter panels - gray for a 1990 Mustang GT hatch
  • Jtlyle78
  • Jan 17, 2026
  • Want to Buy
Replies
1
Views
186
Want to Buy Jan 22, 2026
KRUISR
Electrical Fried my window motor…
  • AnthonyA1234
  • Oct 25, 2024
  • Fox 5.0 Mustang Tech
Replies
8
Views
367
Fox 5.0 Mustang Tech Oct 26, 2024
General karthief
P
window motor gear pins
  • patcal096
  • Oct 30, 2024
  • Other Auto Tech
Replies
7
Views
441
Other Auto Tech Nov 2, 2024
Blown88GT
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?