couple of trans question

[mity2]

i need to know what torque do i need to tighten the bolts that holds pressure plate to flywheel?
And does anyone know what the part nunber for bolts that bolts belhousing to engine? my local ford dealer snapped at me(whole another story ) that its not on the parts system, but i know its there



and i still can't get the pilot bearing out

 

[mity2]

ttt

 

[hotrodnut]

For the removal of the pilot bearing I have always just filled the hole up with axle bearing grease and used a dowel the same size as the inner diameter of the pilot bearing and by placing the dowel in the ID of the bearing and giving it a good smack with a hammer it would pop the pilot bearing right out.

Sorry can't help you with the other questions mity2.

 

[mity2]

I got the pilot bearing out. neigbor had pilot bearing removal tool handy

So noone knows the torque spec on the pressure plate bolts??

 

[hotrodnut]

I got the pilot bearing out. neigbor had pilot bearing removal tool handy

So noone knows the torque spec on the pressure plate bolts??

Good deal, it's nice to have nice neighbors isn't it?

 

[mity2]

Good deal, it's nice to have nice neighbors isn't it?

ya he let me bollow 30gal airtank, impact gun, tranny jack, and now puller. wish he let me bollow his oldest doughter...

 

[blackink00]

for the pressure plate its 12-24ft-lb. i used 17ft-lbs

 

[mity2]

u rock!!

 

[blackink00]

u rock!!

i keep my haynes manuel right by the comp just for you mity2

 

[mity2]

i keep my haynes manuel right by the comp just for you mity2

I should go buy one of them......
How do u keep flywheel from spining while you torque the bolts?!?!?!