• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Custom Chip Question

  • Thread starter Thread starter Fast_Mustang87
  • Start date Start date Dec 28, 2007

Fast_Mustang87

New Member
Aug 24, 2004
97
1
0
Illinois
Dec 28, 2007
#1
  • Dec 28, 2007
  • #1
Hey everyone, I was wandering if anyone has had a custom chip done for there fox body mustang at Anderson Ford Motorsports. I have a 91 347 stroker coupe that is in need of one i believe. I have every basic bolt on except for a performance upper/lower intake and performance heads also i have a full exhaust system. I have stock E-7's that's been ported and polished along with a crane cam 529 lift. I bought a set of 24# injectors along with a 73mm mass air meter but have not installed them. But the problem is i'm running really rich and i can't seem to find out the problem. The guy i bought the car off of said it needed a custom chip done to it to make it running better or it's because of the cam is too big, but i have upgraded valve springs and after market roller rockers and i don't see how that would be the problem. But it's a stock computer i have in there now but my question is would a custom chip and dyno tune from Anderson Ford Motorsports solve my problems? I'm kind of new to mustangs and don't know what i should do, Anyone know what i should do? Thanks.
 

stykthyn

I want to measure mine. It doesn't look that tall.
15 Year Member
Jul 6, 2006
5,232
2,652
223
gainesville
Dec 28, 2007
#2
  • Dec 28, 2007
  • #2
a custom dyno tune can solve many problems, fuel curves being one of them. one of your local shops could get the job done. why send it off?
 

Fast_Mustang87

New Member
Aug 24, 2004
97
1
0
Illinois
Dec 28, 2007
#3
  • Dec 28, 2007
  • #3
I'm about a hour away from Anderson Ford Motorsports. My problem seems to be fuel but we will see when it go's in to the shop.
 
You must log in or register to reply here.

Similar threads

B
Electrical Why does my fox body keep frying eecs
  • brandyn200
  • Jun 20, 2026
  • Fox 5.0 Mustang Tech
Replies
8
Views
521
Fox 5.0 Mustang Tech Jun 25, 2026
AeroCoupe
N
Looking for ECU/CHIP for 1992 5.0
  • Nathan26
  • Sep 26, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
9
Views
336
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 8, 2026
Qtrhrse23
K
Engine Gt40p vs 180 procomp
  • Kleinjj27
  • Oct 27, 2026
  • Fox 5.0 Mustang Tech
Replies
17
Views
509
Fox 5.0 Mustang Tech Nov 3, 2026
Kleinjj27
K
J
Resolved Ford 302 damper issue
  • James S
  • Aug 8, 2026
  • Other Auto Tech
Replies
0
Views
174
Other Auto Tech Aug 8, 2026
James S
J
Surging/stalling! problem or tune?
  • djj62478
  • Oct 4, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
11
Views
403
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Oct 14, 2026
KRUISR
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?