So I’m at a loss..... I have a dash light that I assumed was the coolant level sensor. I thought the old one went bad at the recovery tank because it was in bad shape. So I finally got a new recovery tank installed and flushed the radiator but the light is still on. No leaks, at full line, new fluid, checked voltage at the plug and I thought it read .5 volts. I don’t know what’s supposed to be there but I assume that’s enough. So why won’t that damn light go out??
Also I know thermostat works and feeds back into recovery we tested that while flushing
Also I know thermostat works and feeds back into recovery we tested that while flushing