Detailed: 00 GT - Minor Paint Correction / Gloss enhancement

fiveoho · Jul 20, 2011

My second detail with a DA. Thought i would try and improve the paint on my 2000 GT. The car is far from perfect but in above average condition. Minor swirls in the paint from washing and quick detailing. The decklid had alot of oxidation. It wasn't only visible, it felt like sandpaper. I was able to get ALL of that out. Total time spent was around 9 hours. Not a professional job but i am happy with the results. The pics of the lights listed below are my attempt to show the swirl free finish. Silver is a difficult color to give that visual 'pop' but the autoglym wax helped define it more - awesome wax!

interior

simple green 50/50 mix
CG silk shine

wheels

CG citrus wash clear
microfiber cloth

wash

initial wash : CG citruswash & gloss (1oz to 1gal)
simple green 50/50 mix
turtle wax bug & tar remover
CG premium mitt

finish wash : CG maxi suds II
CG premium mitt

paint prep

mothers showtime & claybar

paint correction

porter cable 7424xp
CG 721 / ccs orange light cutting pad
CG scratch & swirl / ccs orange light cutting pad
CG p40 polish / ccs white polishing pad
CG all-in-1 polish / ccs white polishing pad
CG wet mirror finish / ccs gray finishing pad

protection

AutoGlym HD wax / applied by hand

glass

CG glass cleaner

tires & trim

jax wax super blue

View attachment 181177

View attachment 181184

View attachment 181185

DOHC otto · Jul 20, 2011

I guess the car looks super clean is a little bit of an understatment , but seriously it looks great mang.

I'll be by early on Sat. so you can start at the Mach

fiveoho · Jul 20, 2011

^ thanks buddy

i still need more practice before tackling a car as nice as your mach.

Deleted member 38176 · Jul 20, 2011

Just add a hood scoop and that car is money!

fiveoho · Jul 20, 2011

N8Dogg98 · Jul 20, 2011

Looks great! YOu know what would look sweet on your car is a Mach 1 c-pillar.

fiveoho · Jul 20, 2011

N8Dogg98 said:
Looks great! YOu know what would look sweet on your car is a Mach 1 c-pillar.

thanks man.

hmm, show me.

Devcon · Jul 21, 2011

im digging the silver. It looks sick without the spoiler

yan · Jul 21, 2011

nice work, when can you do that to my car?

PAN1K · Jul 21, 2011

Omg it's soooo clean! Haha.. The car looks absolutely amazing man! Everything has been done JUST right....

stprorolla49 · Jul 21, 2011

Looks amazing! I just did a detail on mine this past weekend and used many of the same products, including the AGHD...such an amazing wax!

Side note, where the heck did you get your chin spoiler? I haven't seen them in matte finish with the ends going all the way back to the wheel well in a long time!

N8Dogg98 · Jul 21, 2011

Check out teh diffference in this guys c-pillar compared to yours

http://www.stangnet.com/mustang-forums/772360-bullitt-mach1-c-pillar-swap.html

wht93gtEd · Jul 21, 2011

The white pad doesn't have much cut, so your paint was probably pretty decent to begin with.

I had to use the CCS yellow, orange, white, and finally black on mine and that didn't even get "all" the swirls out. But I wasn't using a super aggressive polish.

I used to tape everything off too, but it was such a hassle and I found not really necessary.

Keep a spray bottle with a 50/50 mix of rubbing alcohol & water. Then just be careful around trim when polishing and any polish that gets on it can easily be removed with the alcohol/water mix. Then, for the final wax/sealant/whatever, just do the large areas with machine and detailed areas near trim by hand. Way faster than taping.

Not to mention I've had tape leave glue and had to remove that...yes, even painters tape has left glue for me.

gtthomas · Jul 21, 2011

how much do you charge? lol

fiveoho · Jul 21, 2011

Devcon said:
im digging the silver. It looks sick without the spoiler

thank ya sir

fiveoho · Jul 21, 2011

yan said:
nice work, when can you do that to my car?

saturday @ 8:00 am ?

fiveoho · Jul 21, 2011

PAN1K said:
Omg it's soooo clean! Haha.. The car looks absolutely amazing man! Everything has been done JUST right....

i appreciate that man. clean and simple is what i like

fiveoho · Jul 21, 2011

stprorolla49 said:
Looks amazing! I just did a detail on mine this past weekend and used many of the same products, including the AGHD...such an amazing wax!

Side note, where the heck did you get your chin spoiler? I haven't seen them in matte finish with the ends going all the way back to the wheel well in a long time!

thanks ! so you are big fan of the AG too? got mine on clearance at walmart for $10 !!

ill have to ask the girlfriend where she got the chin, it was a gift. im thinking it came from latemodelrestoration. seems it xenon brand.

fiveoho · Jul 21, 2011

N8Dogg98 said:
Check out teh diffference in this guys c-pillar compared to yours

http://www.stangnet.com/mustang-forums/772360-bullitt-mach1-c-pillar-swap.html

hey, now thats a nice little subtle change!

N8Dogg98 · Jul 21, 2011

^ seriously... it's such a small change but it makes a huge difference in the appearance of the 99-04's IMO. Should have come with the Mach 1/Bullitt c-pillar from the factory

Detailed: 00 GT - Minor Paint Correction / Gloss enhancement

fiveoho

Attachments

DOHC otto

Member

fiveoho

Deleted member 38176

fiveoho

Attachments

N8Dogg98

fiveoho

Devcon

Member

yan

New Member

PAN1K

Member

stprorolla49

Active Member

N8Dogg98

wht93gtEd

Active Member

gtthomas

Member

fiveoho

fiveoho

fiveoho

fiveoho

fiveoho

N8Dogg98

Similar threads

Detailed: 00 GT - Minor Paint Correction / Gloss enhancement

Attachments

Member

Deleted member 38176

Attachments

Member

New Member

Member

Active Member

Active Member

Member

Similar threads

Privacy & Transparency

Privacy & Transparency