So if anyone saw my thread a few weeks ago I mistakenly used an sn95 bellhousing on my fox.
My question now is, what is the length or depth of a regular fox bellhousing because at this point I'm not sure if this bellhousing on my car is from an sn95 or a fox. Thanks for any help
I wasn't able to find the dimensions but an easy way to tell is the sn95 bell housing has a vent sort of thing on top of it which I could feel when reaching in through the engine bay
The easiest way to tell the difference between a stock fox and SN95 bell housing without measuring the depth is the position of the clutch fork. The fork on the fox housing is closer to 9 o'clock while the SN95 housing is closer to 7 o'clock. That, in addition to the SN95 EGR feed tube on the passenger side, is the only other reason manufacturers make different headers for fox and SN95 5.0 cars.