C CARYEMLER New Member Jul 11, 2011 7 0 1 Greeley, Co Sep 23, 2011 #1 Sep 23, 2011 #1 Just got some 93 cobra roller rockers do I need guide plate or shims?
wythors Get off my lawn!!! Founding Member May 17, 2000 2,277 35 69 C Addle Sep 23, 2011 #2 Sep 23, 2011 #2 Guide plates, no. Shims, maybe. You'll have to install them and check.
Kdubslugga Active Member Jun 7, 2003 1,515 3 38 Akron, OH Sep 23, 2011 #3 Sep 23, 2011 #3 I didnt use either on mine. Had em on for 8 years
R reldla1996 Member May 4, 2011 356 22 19 Dayton, Ohio Sep 24, 2011 #4 Sep 24, 2011 #4 I shimmed mine, but no on the guideplates.
Rick 91GT Mustang Master Nov 29, 1999 9,692 95 99 PA Sep 24, 2011 #5 Sep 24, 2011 #5 What cylinder head?
Chrome_Rust Member Dec 5, 2008 530 1 17 Findlay, Ohio Sep 24, 2011 #6 Sep 24, 2011 #6 I dont have any guides or shims on mine, but I have some valve train noise. I need to sand the base and tighten up the tolerances a little....
I dont have any guides or shims on mine, but I have some valve train noise. I need to sand the base and tighten up the tolerances a little....