Door Panel Interchangibility

i don't think the panels will fit.....you may want to look in an issue of mm&ff and see what you can locate in there, it seems to me there is a company that sells parts off of used cars. I can't think of the name right off hand, but just get some original door panels, and cut em how you want em, that way you save your originals......maybe even check fleabay..........hotwheels of turborides.com

the newer door panels will fit with no problem. However if you're wanting them because you want to utilize the speaker holes you will have to do some cutting of metal from the door where the speaker holes are in the newer panels. There is no provisions for speakers in the older doors. I do know that the panels themselves will fit right on with no modifications. I'm not sure exactly how difficult it would be to get the speakers in there.

J.

Oops. I said "no modifications". You will actually have to drill a couple holes for the new armrests to bolt to. Very easy though.

If you want to keep the all manual doors, then you will need to get manual window door panels and armrests from the 87-93 cars. Don't do like MM&FF, they got power panels for a projuct car and cut holes for the window crank, only to find out the armrest is longer and won't allow the crank to turn fully! They wasted a good set of black panels that way! Otherwise they will fit with a few new hols drilled to mount the armrest.

Good luck!