do you want the car too sit low and look good or do you want it purely to hook? If you just want it too hook than I would just leave the stockers in there. They usually work better than aftermarket's. Otherwise Eibach makes a draglaunch kit but.... If you're getting pure dragsprings than check out the moroso TRICK drag springs
The Eibach drag springs combined with 90/10's helped my car go consistant 1.61 60fts
You'll be able to pull a wheel..lol
The weight transfer is night/day, I'm going to coilovers now.
nice 60ft's eades but for reference.... My buddy has an 88 lx with H/C/I and a 100shot and all he had for suspension was Upper and Lower control arms and drag radials and he pulled 1.66 60 ft's.
Was he spraying outta the hole? The only bad thing about the S-Trim is that I have to launch all motor. I think with a hard launch on some kinda sticky tire 1.6's are doable even with almost all stock setup, but being on the verge of 1.5's consistantly is a big diff.
1.66 is movin...once I get a 2 step or something I should be able to get a load on the motor and launch with about 8psi