• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Drivers Door Rattle

  • Thread starter Thread starter mrpositraction
  • Start date Start date Dec 14, 2004
M

mrpositraction

New Member
Aug 28, 2004
296
0
0
Columbia, MO
Dec 14, 2004
#1
  • Dec 14, 2004
  • #1
I thought I had seen something like this before, but has anyone experienced the drivers door rattle when the window is all the way up. And if so, did you fix it and how. Thanks.
 

squares98

Member
Aug 20, 2004
852
0
17
Orange,ca
Dec 14, 2004
#2
  • Dec 14, 2004
  • #2
the best and only fix i got to work after 5-6 years of monkeying around with that problem was to dynamat my doors. I used the full door pieces and now zero rattle, from the speakers or the windows.
 

Mach1Run

New Member
Jun 25, 2004
333
2
0
Wylie, Texas
Dec 14, 2004
#3
  • Dec 14, 2004
  • #3
Lol, i was chasing a rattle in my passenger door the other day, thought maybe I had blown a speaker. Figured out it was the outside panel vibrating loudly enough to hear in the car driving with certain bass tones. havie not gotten around to fixing it yet though.
 

CManT1914

New Member
Feb 5, 2004
3,172
2
0
Killeen, Texas
Dec 14, 2004
#4
  • Dec 14, 2004
  • #4
My driver's side door squeaks and rattles, whether the window is up or down. I noticed the trim that goes along the top of the door does not sit flush with the trim on the top of the rear fender (not sure if you have it). I don't think my door closes right, but I have no idea why, unless my subframe connectors jacked up the way my body flexes.
 

tomustang

Psychotic Member
Founding Member
Jun 8, 2000
3,434
2
78
McLean Hospital
Dec 14, 2004
#5
  • Dec 14, 2004
  • #5
it could also be that stupid blue box (i think it's a crash sensor) jumped off the harness. did you try taking apart your door panels and see if anything is loose in there?
 
M

mrpositraction

New Member
Aug 28, 2004
296
0
0
Columbia, MO
Dec 14, 2004
#6
  • Dec 14, 2004
  • #6
When I installed my new speaker in front, I looked. But it seems when the window is all the way up, the door appears to flex a little, and this is the only time it is doing it. It did before my subframes and after. It almost sound like the glass is hitting on something. It drives me nuts, I have to take the pressure off the window (by rolling it down just a little tincy wincy bit) and the rattle stops. I hate it, I hate it, I hate it.
 
You must log in or register to reply here.

Similar threads

T
1990 Convertible door squeaking
  • Tom77
  • Jan 23, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
7
Views
258
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jan 24, 2026
Tom77
T
Door wire harnesses 1996 GT
  • Adizzle843
  • Feb 5, 2026
  • SN95 4.6L Mustang Tech
Replies
7
Views
301
SN95 4.6L Mustang Tech Feb 17, 2026
Adizzle843
S
01 GT DRIVERS SIDE DOOR LOCK CYLINDER LINKAGE
  • Scwhitten
  • May 13, 2026
  • SN95 4.6L Mustang Tech
Replies
3
Views
92
SN95 4.6L Mustang Tech Friday at 8:15 PM
melo.timo
M
N
Power door lock motor Question
  • NYFox
  • Mar 15, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
3
Views
207
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Mar 17, 2026
NYFox
N
M
85 Capri 5.0 transmission rattle
  • Mamaclean
  • May 2, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
2
Views
111
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 17, 2026
Mamaclean
M
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?