DRIVER'S SEAT ???

Quick Pony

Member

Nov 28, 2002

129

0

16

Pensacola, Florida

May 12, 2004

#1

• May 12, 2004

• #1

I got in my 1991 5.0 Convertible the other day and ended up in the back seat!

The back of the seat went completely to the rear and now won't stay upright.

Anybody had this problem and know how to fix?

Thanks
Larry

 

_jb_

New Member

Mar 4, 2004

808

0

0

Michigan, Berrien County

May 12, 2004

#2

• May 12, 2004

• #2

Maybe the latch is stuck. What have you checked out about it?

 

84blkstang

Member

Jun 4, 2003

544

1

18

Springfield MO

May 12, 2004

#3

• May 12, 2004

• #3

in mine the actual metal part of the seat split in two and then the track busted also, so as of now it is proped up by a 2x4 looks ghetto but it works

 

bmorrisj

Member

Sep 26, 2003

449

0

17

Buena Park, CA

May 12, 2004

#4

• May 12, 2004

• #4

my track is busted too, would seat rails out of an 86 work....

 

J

Jayber

New Member

May 9, 2004

32

0

0

May 12, 2004

#5

• May 12, 2004

• #5

Yes the rails from 79-93 will all interchange.

 

Ourobos

Member

Apr 12, 2004

260

1

17

May 12, 2004

#6

• May 12, 2004

• #6

Had this problem, maybe not quite as bad. I took the upholestry off the seat, and where the upper horizontal section of the seat meets the vertical sides, had broken. I tac welded it, and it's as good as new.

 

Mavrick

Founding Member

Aug 29, 2002

2,264

0

46

Collingwood, ON

May 12, 2004

#7

• May 12, 2004

• #7

For a temp fix you could just swap the driver and passenger seats.

 

Quick Pony

Member

Nov 28, 2002

129

0

16

Pensacola, Florida

May 15, 2004

#8

• May 15, 2004

• #8

Thanks guys for your help. It almost seems like it has something to do with the adjustment lever on the left of the driver's seat. It just looks kind of "funky".

I'm off work now so I'm going to see what the hell the problem is.

How hard is it to get the seat cover back on if I remove it?

Thanks again

Larry (91 5.0 Convertible)