DSS heads?

[blown4_6]

Anyone running dss full port plus heads? I was wondering if I should use them or another brand or have my own PI's ported. Any help would be appreciated, thanks guys.

 

[04YELLOWGT]

I have heard some bad things about their short blocks nothing really on their heads. MPH has some great heads and so does VT Engines.

 

[04YELLOWGT]

VT Engines: vtengines.com
Modular Powerhouse: modularpowerhouse.com

Prices are listed on the sites.

 

[blown4_6]

I checked them out but I guess I have to call them not much info on there sites about the different stages. They just list flow numbers nothing about bowl work or anything else. I might just have them hand ported here in PA. Thanks

 

[Stan Weiss]

I have not run them but have heard good thing about Fox Lake.
http://www.foxlakeracing.com/

 

[COramprat]

I know someone selling DSS heads. I don't think he had any problems but I'll ask.

 

[04YELLOWGT]

I checked them out but I guess I have to call them not much info on there sites about the different stages. They just list flow numbers nothing about bowl work or anything else. I might just have them hand ported here in PA. Thanks

All Im going to say is becareful who you have port you heads. That can be a VERY costly mistake.

 

[blown4_6]

04 gt, What heads are you running on your car?

 

[04YELLOWGT]

04 gt, What heads are you running on your car?

Stockers. I just upgraded the valve springs and installed the VT Stage 2 Blower cams. I only want 500ish rwhp and I can get there with stock heads easily. Im already at 440rwhp so when I add an extra 10lbs of boost I should I should be at where I want to be. Didnt see the point of dropping another 1500+ on heads when I can get there with the stock ones.

 

[Mike97gt]

I may be very wrong on this but I read somewhere that the DSS heads are also done by fox lake

 

[04YELLOWGT]

I may be very wrong on this but I read somewhere that the DSS heads are also done by fox lake

Ive never heard that but could be.

 

[Stan Weiss]

Stockers. I just upgraded the valve springs and installed the VT Stage 2 Blower cams. I only want 500ish rwhp and I can get there with stock heads easily. Im already at 440rwhp so when I add an extra 10lbs of boost I should I should be at where I want to be. Didnt see the point of dropping another 1500+ on heads when I can get there with the stock ones.

Did you really mean it will take an extra 10lbs of boost to go from 440 rwhp to 500 rwhp?