Dyno tune?'s

[big T]

Is it worth it to dyno tune my car with my current mods? What rwhp/tqe should I be making with one?

 

[ADRENLN]

you dont need it. it would only get you a couple of hp with the mods you have.

save your dyno tune for when you get cams, l/t or a blower or somthing along those lines.

 

[hotrodnut]

ADRENLN's probably right about not needing it, but knowiing the A/F ratio is correct would be somewhat of an influence to at least go do a Dynoday with an A/F check, then decide.

 

[csledd]

yeah.. that's not a bad idea, if your a/f is incorrect you'd want to get a tune to get that fixed. but otherwise you won't need one.

 

[big T]

yeah.. that's not a bad idea, if your a/f is incorrect you'd want to get a tune to get that fixed. but otherwise you won't need one.

I was even thinking of a mail order tune from JDM, pauls high performance, or tim at modular powerhouse...

 

[spederman]

off topic, but nice 1/4 mile time. Amazing what a proper drag suspension and some DR's will get you. Really nice.

 

[Yellow2002GT]

I highly reccomend a Dyno tune! I was running 13.15 with 239 hp and 264 ft lbs of tq and after the SCT dyno tune it made 50 more rwhp by 4300 rpms and 58 more tq at 4100 rpms and a peak gain of 25hp and 40 rwtq! Now running 264 rwhp and 304 rwtq on a aode equipped stang! Ran a new best of 12.99 at 101.64! and 60 ft dropped from 1.81 to 1.73! I have all the basic bolt ons and pan to get over 275 to 280hp from stock heads and cams in the vear future!

"ED"

 

[jstreet0204]

I highly reccomend a Dyno tune! I was running 13.15 with 239 hp and 264 ft lbs of tq and after the SCT dyno tune it made 50 more rwhp by 4300 rpms and 58 more tq at 4100 rpms and a peak gain of 25hp and 40 rwtq! Now running 264 rwhp and 304 rwtq on a aode equipped stang! Ran a new best of 12.99 at 101.64! and 60 ft dropped from 1.81 to 1.73! I have all the basic bolt ons and pan to get over 275 to 280hp from stock heads and cams in the vear future!

"ED"

Disclaimer : Results not typical, your results may vary. Booths for two or more. Check here if tax deductible. Some equipment shown is optional. Price does not include taxes. No Canadian coins. Not recommended for children. Prerecorded for this time zone. Professional driver on closed course, do not attempt these maneuvers. Reproduction strictly prohibited. Cannot be sold in California, Massachusetts or New York. Make sure address shows through window. Expect delays. No solicitors. May contain peanut dust. No alcohol, dogs or horses. No anchovies unless otherwise specified. Restaurant package, not for resale. List at least two alternate dates. First pull up, then pull down. Do not accept if seal is broken. Call toll free number before digging. Driver does not carry cash. Some of the trademarks mentioned in this product appear for identification purposes only. Turn once during cooking cycle. Objects in mirror may be closer than they appear. Record additional transactions on back of previous stub. Unix is a registered trademark of AT&T. Do not fold, spindle or mutilate. No transfers issued until the bus comes to a complete stop. Package sold by weight, not volume. Your mileage may vary. Past performance does not guarantee future performance. It is not a solicitation, nor an offer to buy or sell any security or derivative. All opinions stated are made in good faith, but there is no guarantee that future results will be profitable. Nap was here. No postage necessary if mailed in the United States. Please remain seated until the ride has come to a complete stop.

 

[sgarlic]

I'm going to go out on a limb and say yes, get it dyno'd. If you have the money, and an available dyno, you might as well.. if nothing else, for a baseline.

 

[ADRENLN]

if you do get it dynoed it couldnt hurt anything. you will get a hp number, get yor a/f perfect, and in the process pick up a little power. dont go by what this one guy said, 50, hp and all that crap. i never heard that before. he must have been tuning a viper.