dynomax???

[65notch]

anybody running dyno max mufflers? bullet style perferibly...

im about to redu my exhaust. im looking for the 'out the side, before rear wheel' style but i dont want to spend alot of money. the bullet style look like they would work well with ground clearance issues?

im looking for input from anyone with this type of muffler...
info on sound, look, clearance, cost, etc.

 

[red65]

I have the Dynomax turbos - not bullet-style - with tailpipes out the rear. I like the mufflers - they sound nice without being over-the-top loud (like Flowmaster 40s imho). I could swear they're getting louder with time. Or maybe that's 'cause of the new blower...lol

 

[302 coupe]

the bullets will be loud, they basically just take the edge off running straight headers. Ground clearance should be ok, I think those mufflers are only about 4" around. If you have subframe connectors, you might have some clearance issues with the piping at the exit.

 

[silverbluebp]

Check out my site below, I have pics of the exhaust after I welded it all up. There's also a poor sound clip.
4" round bullets.
They are Loud, just the way I like it!

 

[xj220]

I have the Super Turbos and they're great. Nice rumble to them and are relatively quiet, but can be loud when you want them. My family always complains that they feel the car coming into the garage anywhere in the house.

 

[65notch]

Check out my site below, I have pics of the exhaust after I welded it all up. There's also a poor sound clip.
4" round bullets.
They are Loud, just the way I like it!

hows your ground clearnce with these?
also, im curious of the specs on your wheels.

 

[gonzothegreat]

I have the dynomax super turbo.
I got a video if you are interested.

 

[silverbluebp]

hows your ground clearnce with these?
also, im curious of the specs on your wheels.

The wheels are 15 x 7 TTD's with Dunlop 215/60R-15's, ground clearance is ok. I need to get the rear changed to stop the tires from rubbing the fender lip!
That is a problem leftover from the PO.