E303 VS. Steeda#18

cdog301

Founding Member

Aug 30, 2000

236

1

18

richmond ,ca

Oct 8, 2004

#1

• Oct 8, 2004

• #1

I am finally putting my motor togther and here is what I have AFR 165's GT40 intake DSS 306 shortblock 24lb injectors 65mm tb 76mm c&l MAM crane 1.7's
unfortunately my big concern is passing California smog I know that the E303 is Smog legal but I like the numbers on the Steeda #18 which one should I get? And can I still pass smog with the Steeda #18?

 

1

1990LXDropTop

New Member

Dec 4, 2003

430

0

0

Western Massachusetts

Oct 8, 2004

#2

• Oct 8, 2004

• #2

From what I've heard, the e-cam isn't that good of a cam, and I hear the steeda cams are good. I would go with the steeda. I'm pretty sure you'll be okay with the #18. I think it is the #19 that won't pass. Good luck with whatever decision you make.

 

N

Na5.0HO

New Member

May 29, 2003

342

0

0

Michigan

Oct 8, 2004

#3

• Oct 8, 2004

• #3

I personally have the E303 and love it... sounds awesome and I could feel an improvement in horse. Not sure about the Steeda, but I don't think you'd be dissapointed with the E...

 

bln92cpe

New Member

Dec 15, 2003

158

0

0

Los Angeles, CA

Oct 8, 2004

#4

• Oct 8, 2004

• #4

I got the E cam, I am in cali and i love it, no issues with passing smog at all.

 

larrendeuce

Member

Sep 13, 2003

649

1

19

Southern NJ

Oct 8, 2004

#5

• Oct 8, 2004

• #5

These are the numbers I pulled up from the different cams with dyno 2000.

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Oct 8, 2004

#6

• Oct 8, 2004

• #6

People really need to start researching cams themselves before they start to bash the E-303 without even knowing why. You actually have to look at the specs and know what the hell you're talking about (or real dyno info or experience) before you can comment on a camshaft......Just my opinion.

 

Mike86Stang

Advanced Member

Apr 11, 2000

10,296

0

77

Red Lion, PA

Oct 8, 2004

#7

• Oct 8, 2004

• #7

I *believe* that the E-cam has more ovelap than the # 18 steeda, so you'll make better top end #'s with it. Idle should be comperable with both.

 

1

1990LXDropTop

New Member

Dec 4, 2003

430

0

0

Western Massachusetts

Oct 10, 2004

#8

• Oct 10, 2004

• #8

maverick0716 said:

People really need to start researching cams themselves before they start to bash the E-303 without even knowing why. You actually have to look at the specs and know what the hell you're talking about (or real dyno info or experience) before you can comment on a camshaft......Just my opinion.

Click to expand...

I hope you are not critizing me about my post, because I was in no way bashing the e-cam. I originally wanted to get one, but many people, infact most of them being from this board, keep trying to talk me out of it. I am edging towards the b-cam as of now, but might end up going with the steeda #18, crane 2040, or perhaps even e-cam, due to emissions.

 

9

90Notch

Founding Member

Jan 31, 2002

1,046

0

0

Westwood, MA & yes it's killing me that I'm no

Oct 10, 2004

#9

• Oct 10, 2004

• #9

Neither get a Comp XE270HR-12 (35-324-8) and hold on! Has less overlp than the E should have no problems passing emiss.

 

O

onefastlx

New Member

Sep 9, 2004

42

0

0

Oct 10, 2004

#10

• Oct 10, 2004

• #10

I run a #18 and I like it with my combo but you'd be losing out with it since it only has .480 lift (I use 1.72 rockers for .516 lift) and your AFR's will flow up to around .550. I would also vote for the XE270 as it has right around .550 lift If memory serves me,you could also go the custom route as well .

 

cdog301

Founding Member

Aug 30, 2000

236

1

18

richmond ,ca

Oct 17, 2004

#11

• Oct 17, 2004

• #11

cam

can't find that cam (XE270HR-12 ) anywhere any suggestions?

 

O

onefastlx

New Member

Sep 9, 2004

42

0

0

Oct 17, 2004

#12

• Oct 17, 2004

• #12

cdog301 said:

can't find that cam (XE270HR-12 ) anywhere any suggestions?

Click to expand...

How about www.compcams.com bro? There are actually two "270" cams and one is meant for 1.7 rockers and I believe has a 114 lobe sep and the other has 112.

 

C

Chris6050

Founding Member

Jul 14, 2000

188

0

0

Nazareth, PA

Oct 18, 2004

#13

• Oct 18, 2004

• #13

Ever consider the Trick Flow stage 1 cam? It's cheap, smog legal, sounds good, and makes good power. I have it installed 4* advanced and I didn't notice any loss in bottom end. Just my 2 cents.

 

S

Sicarius428

Active Member

Jan 6, 2004

2,085

5

49

Oct 18, 2004

#14

• Oct 18, 2004

• #14

DON'T get the Trick Flow stage 1 cam!!! It isn't legal in CA... I just went through this and had to yank it out and it was a PITA. It is legal in every other state though. Although I have to give it to the stage 1. Its damn awsome and so is the price. I swaped in the E303 just for good measure.
Kevin

 

K

kevsstang

New Member

Mar 21, 2004

143

0

0

pa

Oct 18, 2004

#15

• Oct 18, 2004

• #15

Sicarius was there a big difference between the two?

 

maverick0716

Founding Member

Jan 12, 2002

3,924

0

56

Chilliwack, BC, Canada

Oct 18, 2004

#16

• Oct 18, 2004

• #16

onefastlx said:

How about www.compcams.com bro? There are actually two "270" cams and one is meant for 1.7 rockers and I believe has a 114 lobe sep and the other has 112.

Click to expand...

The XE270HR-12 is said to be meant for 1.7 rockers, but it actually has the exact same specs as the XE270HR-14 (other than the LSA) which is supposed to be for 1.6 rockers. I emailed Comp Cams and they said either one could be used with 1.6 or 1.7 rockers, it doesn't matter. With 1.6 rockers it has .512 lift and with 1.7's it has .544.