• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

EEC-IV gurus ?

  • Thread starter Thread starter Stealth coupe
  • Start date Start date Mar 11, 2006

Stealth coupe

Founding Member
Jan 2, 2001
53
0
0
New Jersey
Mar 11, 2006
#1
  • Mar 11, 2006
  • #1
Does anyone know why my leftside tailpipe blows more steam when warming
up then the right. Ive asked a good friend of mine the same question and he
smiled and sayed his does the same thing. And a friend of his does the
same . All cars are fox bodies with 5.0 liter engines. Is anyone out there
having the same symptom? I just replaced my headers with long tubes and
changed my header gaskets to copper stye and I noticed heat (blue) marks
in between the flanges on the left bank with same paint bubbling on the
primary tubes, but nothing exists on the right. So im thinking more heat in
the cylinders on the left bank, hence the leftside blowing steam. I wanted to
get a laser heat probe to check my headers for inconsistencies in temps
between left and right bank. Does anyone have any valuble info to add?
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 12, 2006
#2
  • Mar 12, 2006
  • #2
Wheres the EEC-IV question???

You might wanna check the codes and see if anything pops up. You may be running lean/rich on that side.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 12, 2006
#3
  • Mar 12, 2006
  • #3
Sorry for so many reposts, my damn computer needs a rebuild lol.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 12, 2006
#4
  • Mar 12, 2006
  • #4
.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 12, 2006
#5
  • Mar 12, 2006
  • #5
.
 
M

Marlboro_Man

Member
Sep 30, 2005
437
1
18
Houston, TX
Mar 12, 2006
#6
  • Mar 12, 2006
  • #6
.
 

90mustangGT

I felt sorry for girls because
Founding Member
Jan 15, 2002
2,773
17
89
Dallas, GA
Mar 12, 2006
#7
  • Mar 12, 2006
  • #7
One side having a bias is normal, it has to do with the exaust pulsing pulling in an order that pulls more to one side, but none or little at all on the one side...??? Try putting a rag or something to cap off that one side that most of it flows from and see if it flows on the other side, and if you can feel any real backpressure. Very well could be a stopped up muffler, either from a broken baffle or object in the exaust system. A restriction would also lead to more heat. You could remove the catback and run just the midpipe and see if it does the same thing even without the catback system. Does your system have catalyist converters? You could hook a voltmeter to each o2 sensor and see if they have similar readings. It's hard to help without actually seeing the car.
 

Stealth coupe

Founding Member
Jan 2, 2001
53
0
0
New Jersey
Mar 12, 2006
#8
  • Mar 12, 2006
  • #8
Sorry, planned on writing more lastnight but was very tired. Anyway my reference to the EEC is because I figured this might be a ecu thing since many of my friends cars experienced the same . My car has borla muffs, straight thru design. Non cats. No restriction that im aware of. Brand new long tubes with an h pipe so.....
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Mar 12, 2006
#9
  • Mar 12, 2006
  • #9
As Jason indicated, it could be an exhaust cadence or path of least resistance issue. I cant figure out how the computer has anything to do with it.
Matter of fact, the precise metering and monitoring of things with EFI make it less likely to be a tune issue than with a carbed set-up.

Just MHO.



Good luck.
 

vristang

15 Year Member
Mar 31, 2005
4,933
101
124
Seattle
Mar 12, 2006
#10
  • Mar 12, 2006
  • #10
Another vote for uneven pulsations.


jason
 

squeeeg

Founding Member
Jul 4, 2000
1,905
0
0
Michigan
Mar 13, 2006
#11
  • Mar 13, 2006
  • #11
Your computer is fine. This is a normal occurence.
 
C

criticman

Member
Sep 7, 2003
723
1
16
Rome, GA
Mar 13, 2006
#12
  • Mar 13, 2006
  • #12
Yeah, it happens to me too...shorty headers, cat-less H-pipe, Magnaflow cat-backs. It's normal...nothing to worry about.
 
You must log in or register to reply here.

Similar threads

A
P0036 P0056 P0137 P0157 2020 Ford Mustang GT
  • AmkoA
  • Jun 16, 2026
  • 2024+ (S650) Mustang -General/Talk
Replies
0
Views
291
2024+ (S650) Mustang -General/Talk Jun 16, 2026
AmkoA
A
Most ridiculous / dishonest work you have heard a shop recommend?
  • SchwarzStock
  • Jul 19, 2026
  • Off-Topic Hangout
Replies
4
Views
147
Off-Topic Hangout Jul 20, 2026
SchwarzStock
G
1982 Mustang GL 5.0 single to dual exhaust conversion
  • Guyton
  • Jun 27, 2025
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
15
Views
969
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- Jul 1, 2025
limp
Drivetrain 83’ Glx convertible C5 Trans help!
  • JacksonJared2113
  • Dec 25, 2025
  • Fox 5.0 Mustang Tech
Replies
2
Views
542
Fox 5.0 Mustang Tech Dec 26, 2025
JacksonJared2113
Resolved 93 Mustang 5.0 - Cranks but does not start
  • dan50
  • Jul 18, 2026
  • Fox 5.0 Mustang Tech
Replies
6
Views
491
Fox 5.0 Mustang Tech Jul 18, 2026
dan50
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?