egr system removable and smog pump removable

I dont need emmisions so my egr and smog pump needs to go.I'm getting a egr delete plate and egr block off plate.what else has to be done and does anyone have a vacuum diagram for the egr delete or what lines need to be blocked off?
also going to get a smog pump delete pulley.what has to be done to complete the deletion of the smog pump?
 
Leave the EGR as removing it will only cost you $$ in lost fuel economy and not gain you any power. If you do decide to delete the EGR, you need to pull the lower intake and block off the EGR ports at the heads. Blocking it in the upper intake defeats the entire purpose of deleting it all together as you still have the hot EGR gas heating up the manifold and you haven't removed anything...you've just rendered it inoperable.


If your cats are gone, you can remove the smog pump. No need for a delete pulley, you can run a short belt and reroute the belt for a cleaner setup.
 
Leave the EGR as removing it will only cost you $$ in lost fuel economy and not gain you any power. If you do decide to delete the EGR, you need to pull the lower intake and block off the EGR ports at the heads. Blocking it in the upper intake defeats the entire purpose of deleting it all together as you still have the hot EGR gas heating up the manifold and you haven't removed anything...you've just rendered it inoperable.


If your cats are gone, you can remove the smog pump. No need for a delete pulley, you can run a short belt and reroute the belt for a cleaner setup.
the intake I'm getting is external egr.the stock intake is internal right?how would I go about keping the egr system on the external egr?would I beable to use everything I have on my stock intake?