Electric cutout to open headers?

B

blake44

New Member

Aug 19, 2008

0

0

0

Oct 21, 2008

#1

• Oct 21, 2008

• #1

I have an o/r x-pipe and flowmaster 40 series mufflers but it was customly welded on by the previous owner and for some reason my car isn't that loud. (or as loud as i want it to be at certain times)

I just wanted to know how much louder the electric cutout will be. The one that opens it at the headers where it's just straight engine coming out? Someone I know has this done on their truck where he hits a switch and it opens up at the headers I'm guessing. How much does that cost to buy the parts and install? I know most people say it's loud and obnoxious but since it's a switch it isn't permanent so I won't be obnoxious all the time lol

 

Stark77

Member

Jun 11, 2008

501

0

16

Tallahassee, FL

Oct 21, 2008

#2

• Oct 21, 2008

• #2

If it's an offroad X you won't get that much louder than you would with the open headers. You would really only be bypassing the mufflers.

 

georgio440

Member

Nov 22, 2007

195

0

17

Walnut Creek, CA

Oct 21, 2008

#3

• Oct 21, 2008

• #3

Stark77 said:

If it's an offroad X you won't get that much louder than you would with the open headers. You would really only be bypassing the mufflers.

Click to expand...

That's a bigger difference than you think.

 

T

TropicMustang

Member

Jul 29, 2007

77

1

8

Concord

Oct 21, 2008

#4

• Oct 21, 2008

• #4

agreed. The X will change the sound. If you got cutouts it will be pretty loud and the tone of the exhaust will be different.

 

B

blake44

New Member

Aug 19, 2008

0

0

0

Oct 21, 2008

#5

• Oct 21, 2008

• #5

Like will I get these electric cutouts right after the headers and will that be running open headers?

 

bullitt_2620

Member

Oct 11, 2005

91

0

6

San Diego, cali.

Oct 21, 2008

#6

• Oct 21, 2008

• #6

Before I put my catback on I ran my car straight prochamber and it sounded so beastly, and because the sound came after the crossover, it had some sort of tone to it. If it were possible I would run it like that all the time. Try it after the xpipe, I think it will be quite unique, although ive never heard a 4.6 with straight xpipe. Is is a true x or bassani style x? Would a cut out still have some sound going to the mufflers out the back? I would assume all the gas wouldnt go straight out the cutout, im sure that would affect the sound, half cut out, half muffler...

 

Winters98GT

Whoop...whoop-whoop-whoop-whoop...GANGNAM STYLE!!!

Founding Member

Nov 29, 1999

5,520

1,291

224

H Town

Oct 21, 2008

#7

• Oct 21, 2008

• #7

It will sound like a 16 year olds jacked up truck. Don't do it.

 

d98gt

Founding Member

Mar 14, 2002

4,505

59

204

SE Texas

Oct 21, 2008

#8

• Oct 21, 2008

• #8

I ran my car with an open prochamber for a while just to change it up. I get so bored with my exhaust that a day with it loud makes me love the magnaflows that much more.

 

Stark77

Member

Jun 11, 2008

501

0

16

Tallahassee, FL

Oct 21, 2008

#9

• Oct 21, 2008

• #9

Before I had the prochamber I had a custom fab'd set of straight pipes with no connection between each side running all the way to the rear with 1 glasspack on each side. Sounded like **** but was loud as hell.

 

B

bakos24

I find there is nothing better than a tasty wiener

Nov 29, 1999

4,461

87

134

NE, OH

Oct 22, 2008

#10

• Oct 22, 2008

• #10

I had this back in the day. It will defiantly get louder, a lot louder, but not in a good way. Defiantly not something you want to drive around with either. I took them off because the damn cutoffs would not close properly, therefore causing a horrible leak. I wouldn't recommend doing it.

If you want louder, change your mufflers.

 

StangLoveHate

New Member

Feb 18, 2015

11

0

1

Feb 18, 2015

#11

• Feb 18, 2015

• #11

bullitt_2620 said:

Before I put my catback on I ran my car straight prochamber and it sounded so beastly, and because the sound came after the crossover, it had some sort of tone to it. If it were possible I would run it like that all the time. Try it after the xpipe, I think it will be quite unique, although ive never heard a 4.6 with straight xpipe. Is is a true x or bassani style x? Would a cut out still have some sound going to the mufflers out the back? I would assume all the gas wouldnt go straight out the cutout, im sure that would affect the sound, half cut out, half muffler...

Click to expand...

you would be surprised wit how much opening them up stops the exhaust from mking it to the mufflers, HOWEVER tat being said i bought off road cat deletes and offroad x pipe and bent and welded straight pipes all the way back. my electric coutouts make it seem way louder but after letting someone take it down the road......i know terrifying right......it doesnt make it much louder its just the difference between a screaming banshee under your feet and a roar behind you and you leave a cloud of dust. my suggestion is to just open up behind your cats and tie up your pipes and see if you like the sound before buying anything. electric cuts are less than $500 but $500 could go along ways if you a weekend modder doing i all yourself. and the most important thing to remember is always performance most cars arent made to run the stock tune with that little backpressure, if you love the sound of opening the headers up be preparedto deal with a power loss if its even a noticable amount.

 

vertigasen

Active Member

Apr 28, 2004

366

18

29

Falcon, CO

Feb 18, 2015

#12

• Feb 18, 2015

• #12

Do you realize that you just replied a thread that is almost 7 years old?

Welcome to the forums anyway

 

StangLoveHate

New Member

Feb 18, 2015

11

0

1

Feb 18, 2015

#13

• Feb 18, 2015

• #13

Ahahahahai swear i checked it said October 2014. Well i am glad i finally got around to making the account. Been reading for 10 years just stayed paying today.

 

vertigasen

Active Member

Apr 28, 2004

366

18

29

Falcon, CO

Feb 19, 2015

#14

• Feb 19, 2015

• #14

There are a lot of good people here, and some good information. Some people can be "prickish" at times, but just ignore them. If you have questions, just ask......someone will either have the answer, or point you towards it.