• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electrical Gremlins

  • Thread starter Thread starter Hoffman
  • Start date Start date Mar 15, 2006
H

Hoffman

New Member
Sep 11, 2004
27
0
0
Mar 15, 2006
#1
  • Mar 15, 2006
  • #1
I've been helping a friend swap a carb'd 351W into his 1989 mustang. This was originally a mass air car, I got the EFI stuff as payment.... . I checked out Jason Fletchers site, which helped me solve the spark problem, but I'm now having a problem with the turn signal lights and the brake dummy lights are staying on in the instrument gauges when the headlights are turned on. I just read the website today and haven't had a chance to jumper the two connectors on the harness by the brake booster, nor did I remove the EEC power relay, could this be causing the problem? I also noticed that the parking lights stay on when the ignition is turned off, and the headlight switch is off. When I jiggled the starter solenoid they would flicker on and off.. Any ideas
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Mar 15, 2006
#2
  • Mar 15, 2006
  • #2
sounds like you man need to take the instrument cluster out, and clean all the contacts on the back of it. As well as your turn signals, etc etc. Good luck, its not a horrible job but it all that fun either, but when you get it all back together you'll be glad. The only other thing I would do is check all the connectors under dash, steering column.
good luck
Ben
 
H

Hoffman

New Member
Sep 11, 2004
27
0
0
Mar 15, 2006
#3
  • Mar 15, 2006
  • #3
I'm just wonedering why that would be the case since it never had this problem till we pulled the efi harness for the swap? As far as I knew the headlights and other schtuff was completley separate from the EEC crap. Thanks for the suggestion though, I will give it a try.
 

jackchan

New Member
Oct 17, 2004
507
0
0
Mobile Alabama
Mar 16, 2006
#4
  • Mar 16, 2006
  • #4
here is another thought. on your solonoid there is about 4 wires on one side they control your power windows etc. not sure what all is on that but if those 4 wires were left unconnected or on the wrong side, or if one was used as a ground when you put it back that could cause you problems.....not sure its related to what you have but you could check just to make sure.
good luck
Ben
 
You must log in or register to reply here.

Similar threads

8
Grounding issue?
  • 86SilverFox
  • May 16, 2026
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
Replies
4
Views
258
1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk- May 31, 2026
86SilverFox
8
T
Inside is completely dead
  • TunaCar
  • Oct 18, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
352
SN95 4.6L Mustang Tech Oct 20, 2026
DadLife0724
G
2000 GT- Alternator not charging
  • grugug
  • Nov 10, 2026
  • SN95 4.6L Mustang Tech
Replies
10
Views
128
SN95 4.6L Mustang Tech Nov 12, 2026
squeak93
8
Electrical Turn Signal / Lights Issue
  • 86SilverFox
  • Jun 2, 2025
  • Fox 5.0 Mustang Tech
Replies
7
Views
553
Fox 5.0 Mustang Tech Jun 3, 2025
General karthief
1
Electrical 1985 mustang gt Led conversion trouble
  • 1985fox
  • Jan 5, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
849
Fox 5.0 Mustang Tech Jan 15, 2026
1985fox
1
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?