Electrical Electrical short

T

Thebluefox1

Member

Jun 28, 2022

32

3

8

Pasadena

Dec 27, 2022

#1

• Dec 27, 2022

• #1

Hello, I found a short on my car (90 5.0 hatchback) and because it had to do with the dome light switch( i think) I went for a long time and burnt the cables from the connection to the dome light so I was going to run new wires but is there only two cables or three or is it The same diagram for all fuse 8

 

Attachments

• 73563BD6-0661-4303-91DD-E799AA1F0A3A.webp

  175.4 KB · Views: 189
• A352D8B6-C334-4AA9-B93D-1C94C1DA4839.webp

  397.9 KB · Views: 197

JD1964

there is enough sticking out to grab on to

15 Year Member

Jun 28, 2013

3,612

1,619

194

Maryland

Dec 28, 2022

#2

• Dec 28, 2022

• #2

I think you have a serious wiring problem to figure out because that part of the circuit should have been protected by a fused circuit. If proper, a fuse would blow long before all that wiring overheated like that. That is a fire hazard!

 

T

Thebluefox1

Member

Jun 28, 2022

32

3

8

Pasadena

Dec 28, 2022

#3

• Dec 28, 2022

• #3

Yeah I found a 40 amp fuse instead of the 30 amp it’s supposed to have but I think I figured it out

 

JD1964

there is enough sticking out to grab on to

15 Year Member

Jun 28, 2013

3,612

1,619

194

Maryland

Dec 29, 2022

#4

• Dec 29, 2022

• #4

What circuit related to the dome light would be 30amp? That sounds way too high.

Even then, any true 30amp circuit would probably survive on a 40amp fuse. Even a 40 should blow and protect wires from melting.

The burnt wires you show in the picture look like something that would happen on an unfused circuit.

 

T

Thebluefox1

Member

Jun 28, 2022

32

3

8

Pasadena

Dec 29, 2022

#5

• Dec 29, 2022

• #5

Sorry was confusing it with another its a 15 and it had a 40 but I think all the circuits are fused with correct fuses except that one