Electrical Electrical short

Thebluefox1

New Member
Jun 28, 2022
26
0
1
Pasadena
Hello, I found a short on my car (90 5.0 hatchback) and because it had to do with the dome light switch( i think) I went for a long time and burnt the cables from the connection to the dome light so I was going to run new wires but is there only two cables or three or is it The same diagram for all fuse 8
 

Attachments

  • 73563BD6-0661-4303-91DD-E799AA1F0A3A.jpeg
    73563BD6-0661-4303-91DD-E799AA1F0A3A.jpeg
    303.3 KB · Views: 58
  • A352D8B6-C334-4AA9-B93D-1C94C1DA4839.jpeg
    A352D8B6-C334-4AA9-B93D-1C94C1DA4839.jpeg
    522.2 KB · Views: 54
  • Sponsors (?)


I think you have a serious wiring problem to figure out because that part of the circuit should have been protected by a fused circuit. If proper, a fuse would blow long before all that wiring overheated like that. That is a fire hazard!
 
  • Agree
Reactions: 1 user
What circuit related to the dome light would be 30amp? That sounds way too high.

Even then, any true 30amp circuit would probably survive on a 40amp fuse. Even a 40 should blow and protect wires from melting.

The burnt wires you show in the picture look like something that would happen on an unfused circuit.
 
  • Agree
Reactions: 1 user