• Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech

Electrical/Starting problem

  • Thread starter Thread starter 90FoxBdy
  • Start date Start date Jun 9, 2005
9

90FoxBdy

Founding Member
Jun 17, 2000
553
0
17
Linthicum, MD
Jun 9, 2005
#1
  • Jun 9, 2005
  • #1
Having some problems starting my stang at times. When I go to start it, it seems that all the sudden all power dies. I can turn the key all the way to start and all is fine without the clutch pressed but as soon as I push to push the clutch in and turn the key all the lights dim, the shiftlight flashes and the volts go all the way down like the battery switch was just turned on. Yes the battery is good. However everytime I go to start the car and it wont it does take some voltage away from the battery. Any ideas would be appreciated????
One other thing if I go to jump it from another vehicle it starts up fine. Thanks Ricky
 

stang22

Active Member
Jan 29, 2003
1,318
7
38
Washington, D.C.
Jun 9, 2005
#2
  • Jun 9, 2005
  • #2
How do all of your grounds look? I know you said the battery was good, but have you had it load tested? AutoZone will do it free.

Tim
 

Funhog

New Member
Mar 30, 2005
219
0
0
Alabama
Jun 9, 2005
#3
  • Jun 9, 2005
  • #3
My car is AOD and I have had the same problems with the voltage dropping and the lights dimming. What I did was clean the battery terminals, fill the battery with water, see if my belt was tight, checked the wiring and all the other small stuff with it.
 

HISSIN50

"How long does it take to get help in here?
15 Year Member
Nov 29, 1999
31,179
34
129
Jun 9, 2005
#4
  • Jun 9, 2005
  • #4
I agree with Tim. Since you can jump it fine, that suggests the connections and cables are at least passable. You simply dont have the CCA's to start it.

Load test the old battery and probably end up getting a new one. Have the store bench test the new battery before you buy it - I have had bad ones right off the shelf.

good luck.
 
9

90FoxBdy

Founding Member
Jun 17, 2000
553
0
17
Linthicum, MD
Jun 9, 2005
#5
  • Jun 9, 2005
  • #5
thanks, i will do both in the a.m.
 
You must log in or register to reply here.

Similar threads

Electrical problem plug in the drivers kick panel
  • Mindseye007
  • Aug 16, 2026
  • Fox 5.0 Mustang Tech
Replies
3
Views
167
Fox 5.0 Mustang Tech Aug 16, 2026
Mindseye007
Electrical Issues with my 2006 mustang gt
  • VerneVdV
  • May 22, 2026
  • 2005 - 2009 Specific Tech
Replies
0
Views
171
2005 - 2009 Specific Tech May 22, 2026
VerneVdV
A
1987 5.0 speed density Foxbody crank no start
  • Alan2204
  • May 23, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
453
Fox 5.0 Mustang Tech May 30, 2026
Mcmahst
C
Electrical HELP! 1989 5.0 Stick, Voltage Bleed onto Ignition Trigger wire
  • ChickenDeluxe
  • May 14, 2026
  • Fox 5.0 Mustang Tech
Replies
7
Views
313
Fox 5.0 Mustang Tech May 24, 2026
ChickenDeluxe
C
E
2007 GT Stalls when lights or a/c turned on
  • ejscarfo
  • Jun 22, 2026
  • 2005 - 2009 Specific Tech
Replies
3
Views
248
2005 - 2009 Specific Tech Sep 26, 2026
manicmechanic007
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1979 - 1995 (Fox, SN95.0, & 2.3L) -General/Talk-
  • Fox 5.0 Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?