Engine bay wires/ right side

Blueinfan · Jan 9, 2022

Hi ALL,

I'm reaching out to the Mustang Stang community for some help. I have a 1991 Ford Mustang LX convertible, I removed the wires to paint the sides not thinking of taking picttures. So now after painting the sides I'm lost. So can you guys please send me pictures of the wires of your stang, please? I know that some male parts have their female parts. The wires I'm more concerned about are the grounds, the red, yellow one, and the little box.

thanks again.

KRUISR · Jan 10, 2022

How about a pic of your "mess"?

Blueinfan · Jan 10, 2022

Here you go. The wires with the blue painters tape are the ones in question.

Mustang5L5 · Jan 10, 2022

Your solenoid wiring is wrong.

I assume you have the older pre-92 style starter? If so, put the single wire down to the starter on one side of the solenoid, and all the others on the other side. Doesn’t matter which side gets what.

If it’s a 92-93 mini starter, slightly different.

The grounds look fine.

I can’t make out the single gray plug wire colors. It’s either the hood light or windshield washer pump test plug.

Blueinfan · Jan 11, 2022

Mustang5L5 said:
Your solenoid wiring is wrong.

I assume you have the older pre-92 style starter? If so, put the single wire down to the starter on one side of the solenoid, and all the others on the other side. Doesn’t matter which side gets what.

If it’s a 92-93 mini starter, slightly different.

The grounds look fine.

I can’t make out the single gray plug wire colors. It’s either the hood light or windshield washer pump test plug.

I have a 130 AMP alternator that I have not installed yet. Are those ground wires correct?

Blueinfan · Jan 11, 2022

Mustang5L5 said:
Your solenoid wiring is wrong.

I assume you have the older pre-92 style starter? If so, put the single wire down to the starter on one side of the solenoid, and all the others on the other side. Doesn’t matter which side gets what.

If it’s a 92-93 mini starter, slightly different.

The grounds look fine.

I can’t make out the single gray plug wire colors. It’s either the hood light or windshield washer pump test plug.

Your solenoid wiring is wrong. ---------------ok

I assume you have the older pre-92 style starter? - ---------Yes, still stock
If so, put the single wire down to the starter on one side of the solenoid, and all the others on the other side. ----OK

Doesn’t matter which side gets what. ok

thank you!

Potomus Pete · Jan 11, 2022

Blueinfan said:
Here you go. The wires with the blue painters tape are the ones in question.

I want some Livewires

Wayne Waldrep · Jan 15, 2022

Potomus Pete said:
I want some Livewires

They aren't big enough!

Potomus Pete · Jan 15, 2022

Highly rated, and look good. I'll take blue please, or maybe I won't for a hundred bucks.

Boostedpimp · Jan 15, 2022

I actually have had a set of blue livewires on my red coupe for about five years or so.. awesome wires

Engine bay wires/ right side

Blueinfan

Active Member

KRUISR

Blueinfan

Active Member

Attachments

Mustang5L5

That is…until I whipped out my Bissell

Blueinfan

Active Member

Blueinfan

Active Member

Potomus Pete

I'm still waiting for the fully nude shots

Wayne Waldrep

Before I post a pic, do you have one of yours?

Potomus Pete

I'm still waiting for the fully nude shots

Boostedpimp

Similar threads

Engine bay wires/ right side

Active Member

Active Member

Attachments

That is…until I whipped out my Bissell

Active Member

Active Member

I'm still waiting for the fully nude shots

Before I post a pic, do you have one of yours?

I'm still waiting for the fully nude shots

Similar threads

Privacy & Transparency

Privacy & Transparency