• Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech

Exhaust leak...

  • Thread starter Thread starter Matto
  • Start date Start date Sep 19, 2004
  • 1
  • 2
Next
1 of 2 Next Last
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#1
  • Sep 19, 2004
  • #1
What kinda noise does the car make if it has an exhaust leak. Also, how would the sound differentiate(sp?) while driving?
 

Go HoTO!

New Member
Apr 11, 2004
602
0
0
Mountaintop, PA
Sep 19, 2004
#2
  • Sep 19, 2004
  • #2
It's a ticking sound. You really hear it when driving next to a wall. You can also place a sheet a plywood on the side of the car and rev it up.
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#3
  • Sep 19, 2004
  • #3
Go HoTO! said:
It's a ticking sound. You really hear it when driving next to a wall. You can also place a sheet a plywood on the side of the car and rev it up.
Click to expand...
Hmph, so it wouldn't be really loud then? Cause this tick I can hear while driving down the road and its really noticable.
 
D

DarkShadowGT

Founding Member
Oct 16, 2002
177
0
16
Las Vegas, NV
Sep 19, 2004
#4
  • Sep 19, 2004
  • #4
most people say it sounds like a sprinkler. (pfft pfft pfft) it should be rhythmic.when i had an exhaust leak you can REALLY hear it putting a load on the engine (like driving uphill in a high gear) with the windows up.
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#5
  • Sep 19, 2004
  • #5
DarkShadowGT said:
most people say it sounds like a sprinkler. (pfft pfft pfft) it should be rhythmic.when i had an exhaust leak you can REALLY hear it putting a load on the engine (like driving uphill in a high gear) with the windows up.
Click to expand...
So its pretty damn loud then? Like embarrasing to drive around in public loud? lol
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#6
  • Sep 19, 2004
  • #6
Oh I forgot, when the mechanic dropped the tranny and stuff because he thought the ticking may be in there, he had to take off the X pipe. When he put it all back together it was still tapping, so if it were an exhaust leak wouldn't puttng it back on and tightening everything fixed that?
 
2

2002BLGT

Well-Known Member
Dec 18, 2003
2,945
4
59
Bedford VA
Sep 19, 2004
#7
  • Sep 19, 2004
  • #7
its probably the x pipe where it bolts to the manifolds , if you dont take out the factory studs and put regular studs in , they will leak everytime ....IMO.... lots of experience with this before I put long tubes on , best mod beside supercharger I have done by the way.....
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#8
  • Sep 19, 2004
  • #8
2002BLGT said:
its probably the x pipe where it bolts to the manifolds , if you dont take out the factory studs and put regular studs in , they will leak everytime ....IMO.... lots of experience with this before I put long tubes on , best mod beside supercharger I have done by the way.....
Click to expand...
Would it make a loud ass ticking that sounds like a lifter or something? How much are these regular studs and where can I get them?
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 19, 2004
#9
  • Sep 19, 2004
  • #9
ttt
 
D

DarkShadowGT

Founding Member
Oct 16, 2002
177
0
16
Las Vegas, NV
Sep 20, 2004
#10
  • Sep 20, 2004
  • #10
its not embarrasing to drive around, its jsut annoying to the driver. Maybe another driver can hear it, doubt it though.
 

dkshadow

Banned
May 12, 2003
952
0
0
TEXAS
Sep 20, 2004
#11
  • Sep 20, 2004
  • #11
I had an exhaust leak and it was embarrasing.
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Sep 20, 2004
#12
  • Sep 20, 2004
  • #12
i think i have the same exhaust leaking sound, but everyone adds mid pipes are all you guys changing the studs?

i have the stock studs and will be willing to try the stud kit to stop the noise.

a while back i got a number for a stud kit, but people were associating it with magnaflows x pipe, would it be the same for all mid pipes? heres the #

napa#600-1819

where can me and the other guys get this if its correct? all i got was the #, not the place.
 
D

DarkShadowGT

Founding Member
Oct 16, 2002
177
0
16
Las Vegas, NV
Sep 20, 2004
#13
  • Sep 20, 2004
  • #13
i got the stud kit for the driver side. thats how i got rid of the leak
like the part number says: you get it from NAPA
 

jivepepper

Founding Member
Jun 19, 2002
776
5
18
Under a Sombrero. in WV.
Sep 20, 2004
#14
  • Sep 20, 2004
  • #14
I have changed my manifold bolts amd a lot of people do .Also was the passenger side gasket in good shape ?
 
D

DarkShadowGT

Founding Member
Oct 16, 2002
177
0
16
Las Vegas, NV
Sep 20, 2004
#15
  • Sep 20, 2004
  • #15
oh yeah dont use the paper looking gasket they gave you. Just use the ford one if its still good. If you use the paper one the gasket will eventually break.
 

KronicRacer

Member
Jun 23, 2004
502
1
18
puttering around Ft Lauderdale, FL
Sep 20, 2004
#16
  • Sep 20, 2004
  • #16
i went through that this weekend. needless to say it pissed off my neighbors. LOL
got it fixed though, the driver side tubing was out of alignment slightly and not tight enuff. *damn mac for including no instructions*. basically what gave it away was it was too loud sound and the sound was unbalanced.
 

Snarf

New Member
Dec 24, 2003
237
1
0
Lexington, KY
Sep 20, 2004
#17
  • Sep 20, 2004
  • #17
Matto said:
Would it make a loud ass ticking that sounds like a lifter or something? How much are these regular studs and where can I get them?
Click to expand...


NAPA parts # 800-1916 [it may be 600-1916.. can't remember] Its a set of studs with a TON less spacing between bothe threaded ends.. it'll make sense when you see it. They're 10 bucks or less and will fix you up well.

Basically it will sound like a loud tip-tip-tip and it'll be pretty rythmic. If you car is loud all around it, instead of only near the exhaust tips, you've def got an exhaust leak. Alos, get under the car with a flashlight and look for carbon buildups on the engine block or tranny. They'l looks like gritty dark partches that will look out of place on the car.

To me it really sounds like you have a leak. Use the studs, and re-align everything yourself, and you should be good!
 
M

Matto

New Member
Apr 21, 2003
287
0
0
Arkansas
Sep 20, 2004
#18
  • Sep 20, 2004
  • #18
Snarf said:
NAPA parts # 800-1916 [it may be 600-1916.. can't remember] Its a set of studs with a TON less spacing between bothe threaded ends.. it'll make sense when you see it. They're 10 bucks or less and will fix you up well.

Basically it will sound like a loud tip-tip-tip and it'll be pretty rythmic. If you car is loud all around it, instead of only near the exhaust tips, you've def got an exhaust leak. Alos, get under the car with a flashlight and look for carbon buildups on the engine block or tranny. They'l looks like gritty dark partches that will look out of place on the car.

To me it really sounds like you have a leak. Use the studs, and re-align everything yourself, and you should be good!
Click to expand...
Thanks bud. See it actually sounds like its coming from the engine if you were to open the hood, but if u look underneath the car it also sounds like its coming from under there. I took it to a mechanic at ford and he actually thought the ticking was coming from the tranny so he tore it apart and stuff and put it back together and it still ticks. which leaves me to wonder if it could possibly be an exhaust leak since its so close by. Now what do these studs go to? The header gasket? If so isn't that a pretty long job?
 

ADRENLN

Active Member
Apr 16, 2003
2,342
3
49
NJ
Sep 20, 2004
#19
  • Sep 20, 2004
  • #19
turns out we all have the wrong part #'s for NAPA. does anyone know the correct one.

i dont want to mess up my car because of an exhaust leak.
 
S

sacstoy02gt

New Member
Jan 5, 2004
124
0
0
Waukesha, WI
Sep 21, 2004
#20
  • Sep 21, 2004
  • #20
Napa Stud PN: #600-1819
(Got some yesterday...they work)
 
  • 1
  • 2
Next
1 of 2 Next Last
You must log in or register to reply here.

Similar threads

D
Exhaust Difficulty of fixing exhaust leak at manifold
  • dqureshi06
  • Aug 27, 2026
  • Fox 5.0 Mustang Tech
Replies
10
Views
251
Fox 5.0 Mustang Tech Aug 28, 2026
General karthief
A
Engine 302 oil leak when running
  • AlexM556
  • Sep 8, 2026
  • Classic Mustang Specific Tech
Replies
14
Views
383
Classic Mustang Specific Tech Saturday at 7:48 PM
AlexM556
A
M
Help! 2003 GT misfire when hot
  • Modular03
  • Feb 10, 2026
  • SN95 4.6L Mustang Tech
Replies
4
Views
504
SN95 4.6L Mustang Tech Feb 13, 2026
Mustang5L5
New Exhaust for 408w stroker
  • SadbutTrue
  • Sep 10, 2026
  • 1965 - 1973 Classic Mustangs -General/Talk-
Replies
1
Views
84
1965 - 1973 Classic Mustangs -General/Talk- Sep 10, 2026
nickyb
Engine Random Misfire at idle.
  • Gulftown980x
  • Jul 29, 2026
  • SN95 4.6L Mustang Tech
Replies
11
Views
436
SN95 4.6L Mustang Tech Jul 31, 2026
squeak93
Share:
Bluesky Email Share Link
  • Mustang Forums
  • 1996 - 2004 SN95 Mustang -General/Talk-
  • SN95 4.6L Mustang Tech
Menu
Log in

Register

  • Forums
  • What's new
  • Media
  • Resources
  • Contact
  • Sponsor
X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?

X

Privacy & Transparency

We use cookies and similar technologies for the following purposes:

  • Personalized ads and content
  • Content measurement and audience insights

Do you accept cookies and these technologies?