Exhaust leak

I

Itkix

New Member

Mar 9, 2009

116

0

0

Apr 10, 2010

#1

• Apr 10, 2010

• #1

I know I've read this but do you think its true, I have a slight exhaust leak where my hpipe meets my header and my car will not idle below 1100 rpm without a surge who believes this could be the cause, Ive had exhaust leaks on other stangs but all they had were like hpipe,mufflers,cai, and had no problems with them, and any good product to fix this leak. Just wondering. besides that cream stuff that just flakes off later. see sig. for mods.

 

I

Itkix

New Member

Mar 9, 2009

116

0

0

Apr 10, 2010

#2

• Apr 10, 2010

• #2

O yea has anyone really solved a idle problem by just fixing a exhaust leak, just trying to figure out my problem. This is with a tuned car.

 

Adam95GT

New Member

Aug 14, 2006

2,564

3

0

Burlington, NJ

Apr 10, 2010

#3

• Apr 10, 2010

• #3

What style collector???And yes if its bad and pre 02's it can cause idle issues.

 

cjrpony

Member

Jan 23, 2010

439

0

17

West Michigan

Apr 10, 2010

#4

• Apr 10, 2010

• #4

I had the same issue with my BBK shorties and H-pipe. I am fixing it with new long tube headers and h-pipe

Well I did fix the exhaust leak on the shorties, too. I searched around on this forum and came up with a Walker exhaust gasket 31540. Fel-pro number is 60458. It is a Nissan part number but it does work. I just cut the ends off each side so that the bolt holts were open and put it on the header studs then hooked up the H-pipe normally. It seemed to do the trick.

 

I

Itkix

New Member

Mar 9, 2009

116

0

0

Apr 11, 2010

#5

• Apr 11, 2010

• #5

Ive got BBk longtubes so 02's are downstream probably about a foot or better from where my hpipe bolts up, got a mac hpipe the flange on it was way small, so I cut some bigger ones off a old x pipe I had and still leaks, but still dont know if that would cause idle problems.

 

revhead347

Apparently my ex-husband made that mistake.

20+ Year Stangneter

Jun 14, 2004

9,302

1,645

214

Acworth, GA

Apr 11, 2010

#6

• Apr 11, 2010

• #6

Even with the exhaust leak behind the O2s, it can still suck in air, and backflow to the O2 sensor. My truck through a code for that issue about 3 months ago. The BBK headers use a ball and socket flange, which hardly ever leaks. I would take it apart, make sure the flanges aren't deformed, and clean them.

Kurt

 

I

Itkix

New Member

Mar 9, 2009

116

0

0

Apr 11, 2010

#7

• Apr 11, 2010

• #7

Dont get any codes, I'm gonna take it apart again this week and see if I can get a better fit flanges are clean and round, but if I knew that wasnt causing surge I wouldnt fool with it.