Exhaust question in AL

99convt · Oct 27, 2005

Hey guys I'm new to the forum and just bought a 1999 Mustang Convt and I have a question. The car has been modified by the previous owner and it runs great, but it is extreamly loud. It has headers and flowmasters with no cats. My question is where is a good place (in Alabama area) to have some cats put on it (the exhaust also stinks too!) and will that quite it down some?
Thanks,
D

Uncle Meat · Oct 28, 2005

99convt said:
Hey guys I'm new to the forum and just bought a 1999 Mustang Convt and I have a question. The car has been modified by the previous owner and it runs great, but it is extreamly loud. It has headers and flowmasters with no cats. My question is where is a good place (in Alabama area) to have some cats put on it (the exhaust also stinks too!) and will that quite it down some?
Thanks,
D

Alabama is pretty big, can you narrow down your location please?

U.M.

GoldnGT · Oct 28, 2005

Phatt_daddy · Oct 28, 2005

How are you keeping the ses light off? Running with no cats on a car that new......................
Any who yea where you from and we can help.

Hey unk, where is prattville?

Nate

99convt · Nov 3, 2005

Sorry about the slow response, but I've had too much going on lately. Thanks for the replies too! I'm in B'ham near Hoover. I sent an email to the mustang club and they said there was a really good place in Odenville that could help me out, but I'm always open to other suggestions. I don't know about the ses light, but I do know it's not on? I just bought the car and only found out a couple of weeks ago about all of the modifications on it. All I want to do is quiet it down some. The reason I'm thinking about putting the cats back on is the stinch of the exhaust gases. It really gives me a headache, but I like the sound. Any help would be great!
Thanks guys,

Uncle Meat · Nov 3, 2005

Phatt_daddy said:
Hey unk, where is prattville?

Nate

12 Miles North of Montgomery, just off of I-65.

U.M.

CMcCarthy · Nov 7, 2005

You will probably save a tremendous amount of money by buying a new H-pipe with cats on it already, and then having the whole thing installed on your car. That makes it a simple bolt on operation with no welding, and any repair shop on earth can handle it. There are either 8 or 10 bolts depending on the brand of H-pipe, and you have to R&R the 4 O2 sensors. It's an hour job in the driveway, or 20 minutes on a lift. If somebody tries to charge more than $100 to install it, walk away.

UA2k1GT · Dec 3, 2005

Since you're in the Hoover area, you may want to give either SpeedSouth or The Exhaust Shop a call. I've heard good things of both places, and I believe both are in Pelham.

bill302 · Dec 5, 2005

if it was mine i would leave it alone with cats you will lose some horse power and alot of good sound . i have a 95 GT without cats with flowmasters i have no problems with exhaust smell or noise. does your exhaust run all the way out the rear of the car, i have seen the same problem on other mustangs where the exhaust is ran and turned down under the car usually at the back of the doors if so the fix would run exhaust out rear of car.let us know where your exhaust stops. but if you just have to have your cats check out link below so far this is a good deal, and it all bolts on, you or any shop can put it on and it also comes with a x-pipe which i highly recomend

http://cgi.ebay.com/ebaymotors/Bass...019670443QQcategoryZ33633QQrdZ1QQcmdZViewItem

dartthower · Dec 8, 2005

acme muffler on 6th ave. no. does a good job for a fair price.

Uncle Meat · Dec 9, 2005

Hmmmm..... First UA2k1GT pops in for the first time in months... Now dartthrower suddenly appears... Just coincidence?

What's up guys?

U.M.

dartthower · Dec 9, 2005

Uncle Meat said:
Hmmmm..... First UA2k1GT pops in for the first time in months... Now dartthrower suddenly appears... Just coincidence?

What's up guys?

U.M.

hey man how are you? I never stopped lurking over here.after the demise of our site ,i dont post to much on any site.but it is good to see your still around.

Uncle Meat · Dec 9, 2005

dartthower said:
hey man how are you? I never stopped lurking over here.after the hostile takeover of our site ,i dont post to much on any site.but it is good to see your still around.

I've always been here. This was my forst 'Stang site and I've always been active in the SVT sub forum. Heck I'm around so much they made me an moderator!

I'm doing good, job is good, family's good, and the Cobra sits in the garage 99% of the time scowling at me for not driving it more often! Lately I've been tossing around the idea of sending my blower/Inlet/TB off to Steigemeier for a custom port job. I kind of want to see how much power I can put down while retaining the stock 8 psi pulley.

So what you been up to?

U.M.

triggz · Dec 9, 2005

dartthower said:
hey man how are you? I never stopped lurking over here.after the hostile takeover of our site ,i dont post to much on any site.but it is good to see your still around.

Whats this about a hostile takeover?

dartthower · Dec 9, 2005

triggz said:
Whats this about a hostile takeover?

jmho.

Uncle Meat · Dec 9, 2005

triggz said:
Whats this about a hostile takeover?

dartthower said:
jmho.

Water under the bridge now...

U.M.

dartthower · Dec 9, 2005

Uncle Meat said:
Water under the bridge now...

U.M.

way under the bridge.sorry i should have phrased that differently.

abouttobeglue · Dec 13, 2005

id go to either acme muffler in downtown bham, good group of guys, or k&m mufflers in tarrant both have done exhaust work on my cars and truck been pleased with both shops

RTGreen · Jan 12, 2006

Meineke in Pelham does great work and is priced cheaper than most of the speed shops

Uncle Meat · Jan 12, 2006

Hey RTGreen! That was posted before Halloween of last year... I'm thinkin' he found a place by now.... at least I sure hope he did!

U.M.

Exhaust question in AL

99convt

New Member

Uncle Meat

Banned

GoldnGT

Phatt_daddy

Member

99convt

New Member

Uncle Meat

Banned

CMcCarthy

UA2k1GT

Boned

bill302

Active Member

dartthower

Uncle Meat

Banned

dartthower

Uncle Meat

Banned

triggz

dartthower

Uncle Meat

Banned

dartthower

abouttobeglue

RTGreen

Uncle Meat

Banned

Similar threads

Exhaust question in AL

New Member

Banned

Member

New Member

Banned

Boned

Active Member

Banned

Banned

Banned

Banned

Similar threads

Privacy & Transparency

Privacy & Transparency